Latest developments in the protection of steels from corrosion and erosion
Editorial
DOI:
https://doi.org/10.5599/jese.1541Keywords:
coating technologies, protective coatings, diffusion coatings, thermal barrier coatings, overlay coatings
Abstract
This Special Issue entitled “Surface coatings: latest developments in the protection of steels from corrosion and erosion” focuses on significant advancements and developments in coating technologies in the protection of steels from corrosion and erosion in different operative environments. This Special Issue intends to cover original research and critical review articles on recent advances in various techniques to combat corrosion and erosion of steels.
Downloads
References
S. Singh, K. Goyal, R. Bhatia, Mechanical and microstructural properties of yttria-stabilized zirconia reinforced Cr3C2-25NiCr thermal spray coatings on steel alloy, Journal of Electrochemical Science and Engineering 12(5) (2022) 819-828. https://doi.org/10.5599/jese.1278
I. G. Akande, O. S. I. Fayomi, B. J. Akpan, O. A. Aogo, P. N. Onwordi, Exploration of the effect of Zn-MgO-UPP coating on hardness, corrosion resistance and microstructure properties of mild steel, Journal of Electrochemical Science and Engineering 12(5) (2022) 829-840. https://doi.org/10.5599/jese.1311
D. Dhand, P. Kumar, J. S. Grewal, Wear behaviour and microstructural characteristics of cold sprayed nickel-alumina coatings on boiler steel, Journal of Electrochemical Science and Engineering 12(5) (2022) 841-849. https://doi.org/10.5599/jese.1270
M. Singh, H. Vasudev, M. Singh, Surface protection of SS-316L with boron nitride based thin films using radio frequency magnetron sputtering technique, Journal of Electrochemical Science and Engineering 12(5) (2022) 851-863. https://doi.org/10.5599/jese.1247
S. Sivaranjan, A. Joshi, K. C. Palani, R. Padmanabhan, J. T. Stokes, Corrosion and wear protection of AISI 4140 carbon steel using a laser-modified high-velocity oxygen fuel thermal sprayed coatings, Journal of Electrochemical Science and Engineering 12(5) (2022) 865-876. https://doi.org/10.5599/jese.1320
S. Kumar, R. Bhatia, H. Singh, R. L. Virdi, Microstructural and mechanical properties of CNT-reinforced ZrO2-Y2O3 coated boiler tube steel T-91 Journal of Electrochemical Science and Engineering 12(5) (2022) 877-888. https://doi.org/10.5599/jese.1228
B. Malvi, M. Roy, Elevated temperature erosion of abradable seal coating Journal of Electrochemical Science and Engineering 12(5) (2022) 889-899. https://doi.org/10.5599/jese.1388.
S. Singh, K. Goyal, R. Bhatia, Effect of nano yttria-stabilized zirconia on properties of Ni-20Cr composite coatings, Journal of Electrochemical Science and Engineering 12(5) (2022) 901-909. https://doi.org/10.5599/jese.1319
S. Singh, P. Kumar, D.K. Goyal, Comparison of erosion performance of uncladded and WC-based laser cladded SS304 and SS410 steels, Journal of Electrochemical Science and Engineering 12(5) (2022) 911-922. https://doi.org/10.5599/jese.1333
Y. Y. Özbek, A. S. Demirkiran, The effect of process parameters on microstructure and corrosion behavior of AISI 4140 steel modified by pulse plasma treatment, Journal of Electrochemical Science and Engineering 12(5) (2022) 935-935. https://doi.org/10.5599/jese.1259
R. Goyal, K. Goyal, Development of CNT reinforced Al2O3-TiO2 coatings for boiler tubes to improve hot corrosion resistance, Journal of Electrochemical Science and Engineering 12(5) (2022) 937-945. https://doi.org/10.5599/jese.1291
Downloads
Published
How to Cite
Issue
Section
License
Articles are published under the terms and conditions of the
Creative Commons Attribution license 4.0 International.
