Progress in eco-friendly aerospace coatings: the future beyond chromates
Review paper
DOI:
https://doi.org/10.5599/jese.2775Keywords:
Aluminium alloys, surface pre-treatment, corrosion protection, aerospace applicationsAbstract
Aluminium alloys have a good strength-to-weight ratio and low density, but they are not impervious to corrosion. Therefore, it is necessary to evaluate their corrosion performance in the atmospheric environment. Paints are typically used to prevent corrosion on aluminium alloys. A conversion or anodized layer, an inhibitor/metal-doped primer, and a polyurethane topcoat are used as 3-layer coatings for aluminium alloy corrosion protection in the aerospace industry. However, major modifications have been made to the protection of aluminium alloys against corrosion as a result of environmental issues. REACH, a European regulation, has significantly altered some finishing procedures for aluminium alloys by prohibiting or restricting the use of Cr(VI)-based compounds, such as chromate conversion, chromic acid anodizing, and chromate sealing. Searching for alternatives to Cr has yielded intriguing results. For many years, sol-gel-based hybrid coatings have been a promising alternative to pretreatment and primer layers, with promising results. This review discusses the current development and advancement in chrome-free corrosion-resistant layer coating systems for aluminium alloys.
Downloads
References
[1] K. Thavasilingam, D. Sakthimurugan, K. Giridharan, Aluminum alloys for aircraft structures, Aerospace Materials (2025) 385-404. https://doi.org/10.1016/B978-0-443-22118-7.00016-6 DOI: https://doi.org/10.1016/B978-0-443-22118-7.00016-6
[2] R. Soni, R. Verma, R. Kumar Garg, V. Sharma, A critical review of recent advances in the aerospace materials, Materials Today: Proceedings 113 (2024) 180-184. https://doi.org/10.1016/j.matpr.2023.08.108 DOI: https://doi.org/10.1016/j.matpr.2023.08.108
[3] S. B. Nagaraju, H. C. Priya, Y. G. T. Girijappa, M. Puttegowda, Lightweight and sustainable materials for aerospace applications, Lightweight and Sustainable Composite Materials (2023) 157-178. https://doi.org/10.1016/B978-0-323-95189-0.00007-X DOI: https://doi.org/10.1016/B978-0-323-95189-0.00007-X
[4] A. K. Sehgal, C. Juneja, J. Singh, S. Kalsi, Comparative analysis and review of materials properties used in aerospace Industries: An overview, Materials Today: Proceedings 48 (2022) 1609-1613. https://doi.org/10.1016/j.matpr.2021.09.498 DOI: https://doi.org/10.1016/j.matpr.2021.09.498
[5] K. Jayakrishna, V. R. Kar, M. T. H. Sultan, M. Rajesh, Materials selection for aerospace components, Sustainable Composites for Aerospace Applications (2018) 1-18. https://doi.org/10.1016/B978-0-08-102131-6.00001-3 DOI: https://doi.org/10.1016/B978-0-08-102131-6.00001-3
[6] L. Zhu, N. Li, P. R. N. Childs, Light-weighting in aerospace component and system design, Propulsion and Power Research 7(2) (2018) 103-119. https://doi.org/10.1016/j.jppr.2018.04.001 DOI: https://doi.org/10.1016/j.jppr.2018.04.001
[7] X. Zhang, Y. Chen, J. Hu, Recent advances in the development of aerospace materials, Progress in Aerospace Sciences 97 (2018) 22-34. https://doi.org/10.1016/j.paerosci.2018.01.001 DOI: https://doi.org/10.1016/j.paerosci.2018.01.001
[8] S.V. Kozhukharov, C. Girginov, S. Portolesi, A. Tsanev, V. Lilova, M. Georgieva, P. Petkov, Sealing of cerium oxide coating primers on anodized AA2024-T3 alloy by boiling in Lourier buffers, Journal of Electrochemical Science and Engineering 14 (2024) 559-582. https://doi.org/10.5599/jese.1949 DOI: https://doi.org/10.5599/jese.1949
[9] S. T. Abrahami, J. M. M. de Kok, H. Terryn, J. M. C. Mol, Towards Cr(VI)-free anodization of aluminum alloys for aerospace adhesive bonding applications, Frontiers of Chemical Science and Engineering 11(3) (2017) 465-482. https://doi.org/10.1007/s11705-017-1641-3 DOI: https://doi.org/10.1007/s11705-017-1641-3
[10] B. Venkataramana, S. Satyanarayana, A study on the effect of multiple abrasive particle impact on the crater sphericity in AWJM using FEA, Materials Today: Proceedings 62 (2022) 5119-5124. https://doi.org/10.1016/j.matpr.2022.02.463 DOI: https://doi.org/10.1016/j.matpr.2022.02.463
[11] I. Danis, F. Monies, P. Lagarrigue, N. Wojtowicz, Cutting forces and their modelling in plunge milling of magnesium-rare earth alloys, The International Journal of Advanced Manufacturing Technology 84(9-12) (2016) 1801-1820. https://doi.org/10.1007/s00170-015-7826-3 DOI: https://doi.org/10.1007/s00170-015-7826-3
[12] E. M. Jackson, P. E. Laibinis, W. E. Collins, A. Ueda, C. D. Wingard, B. Penn, Development and thermal properties of carbon nanotube-polymer composites, Composites B 89 (2016) 362-373. https://doi.org/10.1016/j.compositesb.2015.12.018 DOI: https://doi.org/10.1016/j.compositesb.2015.12.018
[13] S. M. Manladan, F. Yusof, S. Ramesh, M. Fadzil, A review on resistance spot welding of magnesium alloys, The International Journal of Advanced Manufacturing Technology
86(5-8) (2016) 1805-1825. https://doi.org/10.1007/s00170-015-8258-9 DOI: https://doi.org/10.1007/s00170-015-8258-9
[14] A. T. Kermanidis, Aircraft Aluminum Alloys: Applications and Future Trends, Revolutionizing Aircraft Materials and Processes (2020) 21-55. https://doi.org/10.1007/978-3-030-35346-9_2 DOI: https://doi.org/10.1007/978-3-030-35346-9_2
[15] Y. Zhu, K. Sun, G. S. Frankel, Intermetallic Phases in Aluminum Alloys and Their Roles in Localized Corrosion, Journal of The Electrochemical Society 165(11) (2018) C807-C820. https://doi.org/10.1149/2.0931811jes DOI: https://doi.org/10.1149/2.0931811jes
[16] S. K. Kairy, P. A. Rometsch, K. Diao, J. F. Nie, C. H. J. Davies, N. Birbilis, Exploring the electrochemistry of 6xxx series aluminium alloys as a function of Si to Mg ratio, Cu content, ageing conditions and microstructure, Electrochimica Acta 190 (2016) 92-103. https://doi.org/10.1016/j.electacta.2015.12.098 DOI: https://doi.org/10.1016/j.electacta.2015.12.098
[17] L. Li, Z. Li, Y. Zeng, W. Ma, Effects of alloying elements on the electrochemical behaviors of Al-Mg-Ga-In based anode alloys, International Journal of Hydrogen Energy 44(23) (2019) 12073-12084. https://doi.org/10.1016/j.ijhydene.2019.03.081 DOI: https://doi.org/10.1016/j.ijhydene.2019.03.081
[18] A. I. Ikeuba, F. U. Ozioko, A. A. Nwachukwu, G. J. Ugwuoke, A review of the electrochemical and galvanic corrosion behavior of important intermetallic compounds in the context of aluminum alloys, RSC Advances 14(43) (2024) 31921-31953. https://doi.org/10.1039/D4RA06070A DOI: https://doi.org/10.1039/D4RA06070A
[19] A. Poznak, D. Freiberg, P. Sanders, Automotive Wrought Aluminium Alloys, Fundamentals of Aluminium Metallurgy (2018) 333-386. https://doi.org/10.1016/B978-0-08-102063-0.00010-2 DOI: https://doi.org/10.1016/B978-0-08-102063-0.00010-2
[20] P. A. Rometsch, Y. Zhang, S. Knight, Heat treatment of 7xxx series aluminium alloys-Some recent developments, Transactions of Nonferrous Metals Society of China 24(7) (2014) 2003-2017. https://doi.org/10.1016/S1003-6326(14)63306-9 DOI: https://doi.org/10.1016/S1003-6326(14)63306-9
[21] I.-W. Huang, B. L. Hurley, F. Yang, R. G. Buchheit, Dependence on Temperature, pH, and Cl- in the Uniform Corrosion of Aluminum Alloys 2024-T3, 6061-T6, and 7075-T6, Electrochimica Acta 199 (2016) 242-253. https://doi.org/10.1016/j.electacta.2016.03.125 DOI: https://doi.org/10.1016/j.electacta.2016.03.125
[22] Y. Liu, J. M. C. Mol, G. C. A. M. Janssen, Combined Corrosion and Wear of Aluminium Alloy 7075-T6, Journal of Bio- and Tribocorrosion 2(2) (2016) 9. https://doi.org/10.1007/s40735-016-0042-3 DOI: https://doi.org/10.1007/s40735-016-0042-3
[23] A. Shanaghi, M. Kadkhodaie, Investigation of high concentration of benzotriazole on corrosion behaviour of titania-benzotriazole hybrid nanostructured coating applied on Al 7075 by the sol-gel method, Corrosion Engineering, Science and Technology 52(5) (2017) 332-342. https://doi.org/10.1080/1478422X.2017.1288353 DOI: https://doi.org/10.1080/1478422X.2017.1288353
[24] D. V. Dzhurinskiy, S. S. Dautov, P. G. Shornikov, I. Sh. Akhatov, Surface Modification of Aluminum 6061-O Alloy by Plasma Electrolytic Oxidation to Improve Corrosion Resistance Properties, Coatings 11(1) (2020) 4. https://doi.org/10.3390/coatings11010004 DOI: https://doi.org/10.3390/coatings11010004
[25] M. Chen, Y. Ou, Y. Fu, Z. Li, J. Li, S. Liu, Effect of friction stirred Al-Fe-Si particles in 6061 aluminum alloy on structure and corrosion performance of MAO coating, Surface and Coatings Technology 304 (2016) 85-97. https://doi.org/10.1016/j.surfcoat.2016.07.003 DOI: https://doi.org/10.1016/j.surfcoat.2016.07.003
[26] M. R. Jakeria, R. J. Toh, X.-B. Chen, I. S. Cole, Evolution and stability of 2-mercaptobenzimidazole inhibitor film upon Al alloy 6061, Journal of Applied Electrochemistry 52(6) (2022) 1021-1044. https://doi.org/10.1007/s10800-022-01687-w DOI: https://doi.org/10.1007/s10800-022-01687-w
[27] C. Agustín-Sáenz, P. Santa Coloma, F. J. Fernández-Carretero, F. Brusciotti, M. Brizuela, Design of Corrosion Protective and Antistatic Hybrid Sol-Gel Coatings on 6XXX AlMgSi Alloys for Aerospace Application, Coatings 10(5) (2020) 441. https://doi.org/10.3390/coatings10050441 DOI: https://doi.org/10.3390/coatings10050441
[28] P. Dwivedi, A. N. Siddiquee, S. Maheshwari, Issues and Requirements for Aluminum Alloys Used in Aircraft Components: State of the Art, Russian Journal of Non-Ferrous Metals 62(2) (2021) 212-225. https://doi.org/10.3103/S1067821221020048 DOI: https://doi.org/10.3103/S1067821221020048
[29] M. M. Z. Ahmed, M. M. El-Sayed Seleman, D. Fydrych, G. Çam, Friction Stir Welding of Aluminum in the Aerospace Industry: The Current Progress and State-of-the-Art Review, Materials 16(8) (2023) 2971. https://doi.org/10.3390/ma16082971 DOI: https://doi.org/10.3390/ma16082971
[30] S. Gialanella, A. Malandruccolo, Alloys for Aircraft Structures, Aerospace Alloys, Cham., (2020) 41-127. https://doi.org/10.1007/978-3-030-24440-8_3 DOI: https://doi.org/10.1007/978-3-030-24440-8_3
[31] M. D. Vijayakumar, V. Dhinakaran, T. Sathish, G. Muthu, P. M. B. ram, Experimental study of chemical composition of aluminium alloys, Materials Today: Proceedings 37 (2021) 1790-1793. https://doi.org/10.1016/j.matpr.2020.07.391 DOI: https://doi.org/10.1016/j.matpr.2020.07.391
[32] M. S. Kenevisi, Y. Yu, F. Lin, A review on additive manufacturing of Al-Cu (2xxx) aluminium alloys, processes and defects, Materials Science and Technology 37(9) (2021) 805-829. https://doi.org/10.1080/02670836.2021.1958487 DOI: https://doi.org/10.1080/02670836.2021.1958487
[33] R. Ben Moses, R. Ajith Raj, I. Vijay Judges, P. Barath Srinivas, Casting and Microstructural Characterization of High-Performance 2000 Series Aluminum Alloy for Aerospace Applications, Journal of Physics: Conference Series 2837(1) (2024) 012103. https://doi.org/10.1088/1742-6596/2837/1/012103
[34] R. Das, S. Kumar, J. K. Katiyar, S. Choudhury, B. S. Roy, State-of-the-art on microstructural, mechanical and tribological properties of friction stir processed aluminium 2xxx series alloy, Proceedings of the Institution of Mechanical Engineers E (2023). https://doi.org/10.1177/09544089231215223 DOI: https://doi.org/10.1177/09544089231215223
[35] M. Li, Y. Zhang, D. Zhang, L. Wang, X. Huang, X. Chen, W. Li, Q. Zhang, Q. Shen, Q. Zeng, Microstructure and Mechanical Properties of Similar/Dissimilar Resistance Spot‐Welded Aluminum Alloys for Aerospace Applications, Advanced Engineering Materials 26(11) (2024) 2302147. https://doi.org/10.1002/adem.202302147 DOI: https://doi.org/10.1002/adem.202302147
[36] B. Zhou, B. Liu, S. Zhang, The Advancement of 7XXX Series Aluminum Alloys for Aircraft Structures: A Review, Metals 11(5) (2021) 718. https://doi.org/10.3390/met11050718 DOI: https://doi.org/10.3390/met11050718
[37] P. Santa Coloma, U. Izagirre, Y. Belaustegi, J. B. Jorcin, F. J. Cano, N. Lapeña, Chromium-free conversion coatings based on inorganic salts (Zr/Ti/Mn/Mo) for aluminum alloys used in aircraft applications, Applied Surface Science 345 (2015) 24-35. https://doi.org/10.1016/j.apsusc.2015.02.179 DOI: https://doi.org/10.1016/j.apsusc.2015.02.179
[38] P. Tan, J. Qin, X. Quan, D. Yi, B. Wang, Co-strengthening of the multi-phase precipitation in high-strength and toughness cast Al-Cu-Zn-Mg alloy via changing Zn/Mg ratios, Materials Science and Engineering A 873 (2023) 145024. https://doi.org/10.1016/j.msea.2023.145024 DOI: https://doi.org/10.1016/j.msea.2023.145024
[39] Z. Roy, G. Halder, Replacement of halogenated refrigerants towards sustainable cooling system: A review, Chemical Engineering Journal Advances 3 (2020) 100027. https://doi.org/10.1016/j.ceja.2020.100027 DOI: https://doi.org/10.1016/j.ceja.2020.100027
[40] Z. Fang, J. Cao, Y. Guan, Corrosion Prevention and Control During Manufacturing, Corrosion Control Technologies for Aluminum Alloy Vessel (2020) 359-376. https://doi.org/10.1007/978-981-15-1932-1_9 DOI: https://doi.org/10.1007/978-981-15-1932-1_9
[41] S. Kozhukharov, V. Samichkov, Ch. Girginov, M. Machkova, Actual trends in the elaboration of advanced multifunctional coating systems for the efficient protection of lightweight aircraft alloys, Corrosion Reviews 35(6) (2017) 383-396. https://doi.org/10.1515/corrrev-2017-0026 DOI: https://doi.org/10.1515/corrrev-2017-0026
[42] J.P.B. van Dam, U. Tiringer, S.T. Abrahami, I. Milošev, H. Terryn, J. Kovač, J.M.C. Mol, Surface engineering of aerospace aluminium alloys: Understanding alloying effects on chemical pre-treatment and sol-gel coating adhesion, Surface and Coatings Technology 485 (2024) 130901. https://doi.org/10.1016/j.surfcoat.2024.130901 DOI: https://doi.org/10.1016/j.surfcoat.2024.130901
[43] S. Peng, P. Li, Applications of Nanomaterials and Nanotechnology in Military and Aerospace Fields, Nanomaterials and Nanotechnology (2024) 265-308. https://doi.org/10.1007/978-981-97-8433-2_8 DOI: https://doi.org/10.1007/978-981-97-8433-2_8
[44] O. Gharbi, S. Thomas, C. Smith, N. Birbilis, Chromate replacement: what does the future hold?, NPJ Materials Degradation 2(1) (2018) 12. https://doi.org/10.1038/s41529-018-0034-5 DOI: https://doi.org/10.1038/s41529-018-0034-5
[45] F. Peltier, D. Thierry, Review of Cr-Free Coatings for the Corrosion Protection of Aluminum Aerospace Alloys, Coatings 12(4) (2022) 518. https://doi.org/10.3390/coatings12040518
[46] S. Zehra, M. Mobin, J. Aslam, Chromates as corrosion inhibitors, Inorganic Anticorrosive Materials (2022) 251-268. https://doi.org/10.1016/B978-0-323-90410-0.00014-3 DOI: https://doi.org/10.1016/B978-0-323-90410-0.00014-3
[47] N. D. Alexopoulos, C. J. Dalakouras, P. Skarvelis, S. K. Kourkoulis, Accelerated corrosion exposure in ultra thin sheets of 2024 aircraft aluminium alloy for GLARE applications, Corrosion Science 55 (2012) 289-300. https://doi.org/10.1016/j.corsci.2011.10.032 DOI: https://doi.org/10.1016/j.corsci.2011.10.032
[48] G. Yoganandan, J. N. Balaraju, V. K. William Grips, The surface and electrochemical analysis of permanganate based conversion coating on alclad and unclad 2024 alloy, Applied Surface Science 258(22) (2012) 8880-8888. https://doi.org/10.1016/j.apsusc.2012.05.108
[49] R. Parvizi, A. E. Hughes, A. M. Glenn, P. Cizek, M. Y. Tan, M. Forsyth, Role of microstructure in corrosion initiation of a highly-deformed AA2024 wire, Corrosion Science 144 (2018) 184-197. https://doi.org/10.1016/j.corsci.2018.08.052 DOI: https://doi.org/10.1016/j.corsci.2018.08.052
[50] H. Parangusan, J. Bhadra, N. Al-Thani, A review of passivity breakdown on metal surfaces: influence of chloride- and sulfide-ion concentrations, temperature, and pH, Emergent Materials 4(5) (2021) 1187-1203. https://doi.org/10.1007/s42247-021-00194-6 DOI: https://doi.org/10.1007/s42247-021-00194-6
[51] T. G. Harvey, Cerium-based conversion coatings on aluminium alloys: a process review, Corrosion Engineering, Science and Technology 48(4) (2013) 248-269. https://doi.org/10.1179/1743278213Y.0000000089 DOI: https://doi.org/10.1179/1743278213Y.0000000089
[52] M. Kim, L. N. Brewer, G. W. Kubacki, Microstructure and corrosion resistance of chromate conversion coating on cold sprayed aluminum alloy 2024, Surface and Coatings Technology 460 (2023) 129423. https://doi.org/10.1016/j.surfcoat.2023.129423 DOI: https://doi.org/10.1016/j.surfcoat.2023.129423
[53] P. Das, S. Upadhyay, S. Dubey, K. K. Singh, Waste to wealth: Recovery of value-added products from steel slag, Journal of Environmental Chemical Engineering 9(4) (2021) 105640. https://doi.org/10.1016/j.jece.2021.105640 DOI: https://doi.org/10.1016/j.jece.2021.105640
[54] S. Mishra, S. Daniele, Metal-Organic Derivatives with Fluorinated Ligands as Precursors for Inorganic Nanomaterials, Chemical Reviews 115(16) (2015) 8379-8448. https://doi.org/10.1021/cr400637c DOI: https://doi.org/10.1021/cr400637c
[55] M. Paz Martínez-Viademonte, S. T. Abrahami, T. Hack, M. Burchardt, H. Terryn, A Review on Anodizing of Aerospace Aluminum Alloys for Corrosion Protection, Coatings 10(11) (2020) 1106. https://doi.org/10.3390/coatings10111106 DOI: https://doi.org/10.3390/coatings10111106
[56] V. Jothi, A. Y. Adesina, A. M. Kumar, N. Al-Aqeeli, J. S. N. Ram, Influence of an anodized layer on the adhesion and surface protective performance of organic coatings on AA2024 aerospace Al alloy, Progress in Organic Coatings 138 (2020) 105396. https://doi.org/10.1016/j.porgcoat.2019.105396 DOI: https://doi.org/10.1016/j.porgcoat.2019.105396
[57] S. U. Ofoegbu, F. A. O. Fernandes, A. B. Pereira, The Sealing Step in Aluminum Anodizing: A Focus on Sustainable Strategies for Enhancing Both Energy Efficiency and Corrosion Resistance, Coatings 10(3) (2020) 226. https://doi.org/10.3390/coatings10030226 DOI: https://doi.org/10.3390/coatings10030226
[58] J. Gao, Y. Zhang, X. Zhao, S. Li, F. Zhu, Study of simulation and experimental on the damage of stray light absorbing function films induced by nanosecond laser, Materials Chemistry and Physics 287 (2022) 126003. https://doi.org/10.1016/j.matchemphys.2022.126003 DOI: https://doi.org/10.1016/j.matchemphys.2022.126003
[59] P. Visser, H. Terryn, J. M. C. Mol, Aerospace Coatings, (2016) 315-372. https://doi.org/10.1007/978-94-017-7540-3_12 DOI: https://doi.org/10.1007/978-94-017-7540-3_12
[60] Z. Quebbou, M. Chafi, L. E. H. Omari, Corrosion resistance of 5005 aluminum alloy by anodizing treatment in a mixture of phosphoric and boric acids, Materials Today: Proceedings 37 (2021) 3854-3859. https://doi.org/10.1016/j.matpr.2020.08.406 DOI: https://doi.org/10.1016/j.matpr.2020.08.406
[61] R. Elaish, H. El-Labban, H. M. Abd El-Lateef, M. S. El-Dein, Effect of fluorozirconic acid on anodizing of aluminium and AA 2024-T3 alloy in sulphuric and tartaric-sulphuric acids, Surface and Coatings Technology 342 (2018) 233-243. https://doi.org/10.1016/j.surfcoat.2018.02.096 DOI: https://doi.org/10.1016/j.surfcoat.2018.02.096
[62] D. A. Wragg, D. P. Davies, S. L. Jenkins, Influence of and differences between Chromic and Sulphuric acid anodising on the fatigue properties of 7050 T7451 aluminium alloy, International Journal of Fatigue 163 (2022) 107026. https://doi.org/10.1016/j.ijfatigue.2022.107026 DOI: https://doi.org/10.1016/j.ijfatigue.2022.107026
[63] J. C. Avelar-Batista Wilson, A. Grabowski, K. Kustosik, A. D. Wilson, Tartaric acid cross-contamination in post-cascade rinses after sulphuric acid anodising (SAA): Effect on adhesive bond strength of AA6060-T6 alloy, International Journal of Adhesion and Adhesives 81 (2018) 30-35. https://doi.org/10.1016/j.ijadhadh.2017.11.004 DOI: https://doi.org/10.1016/j.ijadhadh.2017.11.004
[64] M. T. Acar, H. Kovacı, A. Çelik, Enhancement of the tribological performance and surface wettability of Ti6Al4V biomedical alloy with boric/sulfuric acid anodic film, Surface Topography: Metrology and Properties 9(3) (2021) 035024. https://doi.org/10.1088/2051-672X/ac1d87 DOI: https://doi.org/10.1088/2051-672X/ac1d87
[65] S. T. Abrahami, T. Hauffman, J. M. M. de Kok, J. M. C. Mol, H. Terryn, XPS Analysis of the Surface Chemistry and Interfacial Bonding of Barrier-Type Cr(VI)-Free Anodic Oxides, The Journal of Physical Chemistry C 119(34) (2015) 19967-19975. https://doi.org/10.1021/acs.jpcc.5b05965 DOI: https://doi.org/10.1021/acs.jpcc.5b05958
[66] T. Vignoli Machado, P. Atz Dick, G. H. Knörnschild, L. F. P. Dick, The effect of different carboxylic acids on the sulfuric acid anodizing of AA2024, Surface and Coatings Technology 383 (2020) 125283. https://doi.org/10.1016/j.surfcoat.2019.125283 DOI: https://doi.org/10.1016/j.surfcoat.2019.125283
[67] S. Kozhukharov, C. Girginov, I. Avramova, M. Machkova, Anodic galvanostatic polarization of AA2024-T3 aircraft alloy in conventional mineral acids, Materials Chemistry and Physics 180 (2016) 301-313. https://doi.org/10.1016/j.matchemphys.2016.06.011 DOI: https://doi.org/10.1016/j.matchemphys.2016.06.011
[68] C. Girginov, S. Kozhukharov, M. Milanes, M. Machkova, Impact of the anodizing duration on the surface morphology and performance of A2024-T3 in a model corrosive medium, Materials Chemistry and Physics 198 (2017) 137-144. https://doi.org/10.1016/j.matchemphys.2017.05.049 DOI: https://doi.org/10.1016/j.matchemphys.2017.05.049
[69] M. Zahedi, K. Jafarzadeh, H. M. Abbasi, S. F. Mirseyed, A. Rostamian, M. Ostadhassan, Development of a highly stable IrO2-RuO2-Ta2O5/Ti with fluorine doped nanotube interlayer, Materials Today Communications 41 (2024) 110636. https://doi.org/10.1016/j.mtcomm.2024.110636 DOI: https://doi.org/10.1016/j.mtcomm.2024.110636
[70] M. F. Montemor, Fostering green inhibitors for corrosion prevention, Active Protective Coatings: New-Generation Coatings for Metals, Dordrecht, The Netherlands. 2016, 107-137. https://doi.org/10.1007/978-94-017-7540-3_6 DOI: https://doi.org/10.1007/978-94-017-7540-3_6
[71] J. Cabral-Miramontes, R. P. Ruiz, O. Ruiz, F. Rubio, Citric Acid as an Alternative to Sulfuric Acid for the Hard-Anodizing of AA6061, Metals 11(11) (2021) 1838. https://doi.org/10.3390/met11111838 DOI: https://doi.org/10.3390/met11111838
[72] J. Cabral-Miramontes, R. P. Ruiz, O. Ruiz, F. Rubio, Anodizing of AA2024 Aluminum-Copper Alloy in Citric-Sulfuric Acid Solution: Effect of Current Density on Corrosion Resistance, Coatings 14(7) (2024) 816. https://doi.org/10.3390/coatings14070816 DOI: https://doi.org/10.3390/coatings14070816
[73] T. Vignoli Machado, P. Atz Dick, G. H. Knörnschild, L. F. P. Dick, The effect of different carboxylic acids on the sulfuric acid anodizing of AA2024, Surface and Coatings Technology 383 (2020) 125283. https://doi.org/10.1016/j.surfcoat.2019.125283 DOI: https://doi.org/10.1016/j.surfcoat.2019.125283
[74] M. L. Mopon, J. S. Garcia, D. M. Manguerra, C. J. C. Narisma, Corrosion Behavior of AA 1100 Anodized in Gallic-Sulfuric Acid Solution, Coatings 11(4) (2021) 405. https://doi.org/10.3390/coatings11040405 DOI: https://doi.org/10.3390/coatings11040405
[75] A. M. Brudzisz, D. Giziński, W. J. Stępniowski, Incorporation of Ions into Nanostructured Anodic Oxides—Mechanism and Functionalities, Molecules 26(21) (2021) 6378. https://doi.org/10.3390/molecules26216378 DOI: https://doi.org/10.3390/molecules26216378
[76] J. Cabral-Miramontes, R. P. Ruiz, O. Ruiz, F. Rubio, Corrosion Resistance of Hard Coat Anodized AA 6061 in Citric-Sulfuric Solutions, Coatings 10(6) (2020) 601. https://doi.org/10.3390/coatings10060601 DOI: https://doi.org/10.3390/coatings10060601
[77] L. González-Rovira, L. González-Souto, P.J. Astola, C. Bravo-Benítez, F.J. Botana, Assessment of the corrosion resistance of self-ordered anodic aluminum oxide (AAO) obtained in tartaric-sulfuric acid (TSA), Surface and Coatings Technology 399 (2020) 126131. https://doi.org/10.1016/j.surfcoat.2020.126131 DOI: https://doi.org/10.1016/j.surfcoat.2020.126131
[78] Y. Zhang, X. Zhang, W. Wang, Y. Feng, X. Tang, B. Zhu, Effect of Chloride Ions on the Sparking Voltage of Working Electrolytes and Its Restraint Method, The Journal of Physical Chemistry C 127(32) (2023) 16148-16155. https://doi.org/10.1021/acs.jpcc.3c03408 DOI: https://doi.org/10.1021/acs.jpcc.3c03408
[79] J. M. Runge, Anodizing as an Industrial Process, in The Metallurgy of Anodizing Aluminum, 2018, 149-190. https://doi.org/10.1007/978-3-319-72177-4_3 DOI: https://doi.org/10.1007/978-3-319-72177-4_3
[80] D. Elabar, G. R. La Monica, M. Santamaria, F. Di Quarto, P. Skeldon, G. E. Thompson, Anodizing of aluminium and AA 2024-T3 alloy in chromic acid: Effects of sulphate on film growth, Surface and Coatings Technology 309 (2017) 480-489. https://doi.org/10.1016/j.surfcoat.2016.11.108 DOI: https://doi.org/10.1016/j.surfcoat.2016.11.108
[81] G. Yoganandan, J. N. Balaraju, V. K. William Grips, Surface and Electrochemical Characteristics of Novel Chromate-Free Mn-V Oxyanion Sealed Tartaric-Sulfuric Acid Anodized Coating, Journal of Materials Engineering and Performance 27(11) (2018) 6175-6188. https://doi.org/10.1007/s11665-018-3648-4 DOI: https://doi.org/10.1007/s11665-018-3648-4
[82] C. Agustín-Sáenz, E. Martín-Ugarte, B. Pérez-Allende, U. Izagirre-Etxeberria, Effect of ethylene glycol dimethacrylate on VOC reduction, rheological, mechanical and anticorrosion properties of a hybrid sol-gel coating on AA2024-T3 and sulfuric acid anodized AA2024-T3, Progress in Organic Coatings 159 (2021) 106408. https://doi.org/10.1016/j.porgcoat.2021.106408 DOI: https://doi.org/10.1016/j.porgcoat.2021.106408
[83] B. Shri Prakash, J. N. Balaraju, Chromate (Cr6+)-free surface treatments for active corrosion protection of aluminum alloys: a review, Journal of Coatings Technology and Research 21(1) (2024) 105-135. https://doi.org/10.1007/s11998-023-00831-1 DOI: https://doi.org/10.1007/s11998-023-00831-1
[84] A. Carangelo, M. Curioni, A. Acquesta, T. Monetta, F. Bellucci, Application of EIS to In Situ Characterization of Hydrothermal Sealing of Anodized Aluminum Alloys: Comparison between Hexavalent Chromium-Based Sealing, Hot Water Sealing and Cerium-Based Sealing, Journal of The Electrochemical Society 163(10) (2016) C619-C626. https://doi.org/10.1149/2.0231610jes DOI: https://doi.org/10.1149/2.0231610jes
[85] F. A. Montes-González, J. D. de la Cruz, E. G. Contreras, E. A. Zaragoza, J. R. Labastida-Sarmiento, Experimental Analysis and Mathematical Model of FSW Parameter Effects on the Corrosion Rate of Al 6061-T6-Cu C11000 Joints, Crystals 11(3) (2021) 294. https://doi.org/10.3390/cryst11030294 DOI: https://doi.org/10.3390/cryst11030294
[86] M. F. Shaffei, H. S. Hussein, A. M. Awad Abouelata, R. M. Osman, M. S. Mohammed, Effect of sealing on characteristics of nano-porous aluminum oxide as black selective coatings, Clean Engineering and Technology 4 (2021) 100156. https://doi.org/10.1016/j.clet.2021.100156 DOI: https://doi.org/10.1016/j.clet.2021.100156
[87] M. Fedel, J. Franch, S. Rossi, Effect of thickness and sealing treatments on the corrosion protection properties of anodic oxide coatings on AA5005, Surface and Coatings Technology 408 (2021) 126761. https://doi.org/10.1016/j.surfcoat.2020.126761 DOI: https://doi.org/10.1016/j.surfcoat.2020.126761
[88] I. Hussain, M. N. Akhtar, A. Shah, H. Nisar, M. S. Raza, H. Ur Rehman, Factors affecting the growth formation of nanostructures and their impact on electrode materials, Materials Today Physics 27 (2022) 100844. https://doi.org/10.1016/j.mtphys.2022.100844 DOI: https://doi.org/10.1016/j.mtphys.2022.100844
[89] Y. LI, Y. ZHANG, S. LI, P. ZHAO, Influence of adipic acid on anodic film formation and corrosion resistance of 2024 aluminum alloy, Transactions of Nonferrous Metals Society of China 26(2) (2016) 492-500. https://doi.org/10.1016/S1003-6326(16)64137-7
[90] B. J. Usman, Green and Effective Anodizing of AA 2024-T3 in Methionine-Sulfuric Acid Electrolyte, Journal of The Electrochemical Society 169(3) (2022) 031503. https://doi.org/10.1149/1945-7111/ac565b DOI: https://doi.org/10.1149/1945-7111/ac565b
[91] A. Covelo, S. Rodil, X. R. Nóvoa, M. Hernández, Development and characterization of sealed anodizing as a corrosion protection for AA2024-T3 in saline media, Materials Today Communications 31 (2022) 103468. https://doi.org/10.1016/j.mtcomm.2022.103468 DOI: https://doi.org/10.1016/j.mtcomm.2022.103468
[92] A. Collazo, I. Ezpeleta, R. Figueroa, X. R. Nóvoa, C. Pérez, Corrosion protection properties of anodized AA2024T3 alloy sealing with organic-based species, Progress in Organic Coatings 147 (2020) 105779. https://doi.org/10.1016/j.porgcoat.2020.105779 DOI: https://doi.org/10.1016/j.porgcoat.2020.105779
[93] N. C. Debnath, Importance of Surface Preparation for Corrosion Protection of Automobiles, Journal of Surface Engineering and Materials Advanced Technology 3(1) (2013) 94-105. https://doi.org/10.4236/jsemat.2013.31A014 DOI: https://doi.org/10.4236/jsemat.2013.31A014
[94] C. Zhou, F. Jiang, Y. Wu, S. Wang, H. Liu, Metal organic frameworks (MOFs) as multifunctional nanoplatform for anticorrosion surfaces and coatings, Advances in Colloid and Interface Science 305 (2022) 102707. https://doi.org/10.1016/j.cis.2022.102707 DOI: https://doi.org/10.1016/j.cis.2022.102707
[95] F. Peltier, D. Thierry, Review of Cr-Free Coatings for the Corrosion Protection of Aluminum Aerospace Alloys, Coatings 12(4) (2022) 518. https://doi.org/10.3390/coatings12040518 DOI: https://doi.org/10.3390/coatings12040518
[96] G. Yoganandan, J. N. Balaraju, V. K. William Grips, The surface and electrochemical analysis of permanganate based conversion coating on alclad and unclad 2024 alloy, Applied Surface Science 258(22) (2012) 8880-8888. https://doi.org/10.1016/j.apsusc.2012.05.108
[97] S. D. Al-Qahtani, G. M. Al-Senani, Immobilization of rare-earth doped aluminate nanoparticles encapsulated with silica into polylactic acid-based color-tunable smart plastic window, International Journal of Biological Macromolecules 264 (2024) 130766. https://doi.org/10.1016/j.ijbiomac.2024.130766 DOI: https://doi.org/10.1016/j.ijbiomac.2024.130766
[98] T. Zehra, M. Kaseem, Lanthanides: The Key to Durable and Sustainable Corrosion Protection, ACS Sustainable Chemistry & Engineering 11(18) (2023) 6776-6800. https://doi.org/10.1021/acssuschemeng.3c00763 DOI: https://doi.org/10.1021/acssuschemeng.3c00763
[99] A. H. Riyas, C. V. Geethanjali, S. Arathy, A. Anil, S. M. A. Shibli, Exploration and tuning of Al2O3/Mo composite for enhancement of anti-corrosion and tribological characteristics in zinc phosphate conversion coatings, Applied Surface Science 593 (2022) 153370. https://doi.org/10.1016/j.apsusc.2022.153370 DOI: https://doi.org/10.1016/j.apsusc.2022.153370
[100] S. Huang, J. Wang, X. Wei, Y. Zhou, L. Wang, J. Zhang, Microstructural characterization and film-forming mechanism of a phosphate chemical conversion ceramic coating prepared on the surface of 2A12 aluminum alloy, RSC Advances 9(33) (2019) 18767-18775. https://doi.org/10.1039/C9RA01173K DOI: https://doi.org/10.1039/C9RA01173K
[101] R.-C. Zeng, F. Zhang, Z.-D. Lan, H.-Z. Cui, E.-H. Han, Corrosion resistance of calcium-modified zinc phosphate conversion coatings on magnesium-aluminium alloys, Corrosion Science 88 (2014) 452-459. https://doi.org/10.1016/j.corsci.2014.08.007 DOI: https://doi.org/10.1016/j.corsci.2014.08.007
[102] C. Amrane, K.-E. Bouhidel, Integrated diffusion dialysis precipitation - Cementation for selective recovery of leaching chemicals and metal values from electroplating sludge, Hydrometallurgy 177 (2018) 34-40. https://doi.org/10.1016/j.hydromet.2018.02.011 DOI: https://doi.org/10.1016/j.hydromet.2018.02.011
[103] B. Herbáth, K. Kovács, M. Jakab, É. Makó, Crystal Structure and Properties of Zinc Phosphate Layers on Aluminum and Steel Alloy Surfaces, Crystals 13(3) (2023) 369. https://doi.org/10.3390/cryst13030369 DOI: https://doi.org/10.3390/cryst13030369
[104] M. Doerre, L. Hibbitts, G. Patrick, N. K. Akafuah, Advances in Automotive Conversion Coatings during Pretreatment of the Body Structure: A Review, Coatings 8(11) (2018) 405. https://doi.org/10.3390/coatings8110405 DOI: https://doi.org/10.3390/coatings8110405
[105] T. Chaudhari, N. Rajagopalan, K. Dam-Johansen, Lignin Phosphate: A Biobased Substitute for Zinc Phosphate in Corrosion-Inhibiting Coatings, ACS Sustainable Chemistry & Engineering 12(20) (2024) 7813-7830. https://doi.org/10.1021/acssuschemeng.4c00782 DOI: https://doi.org/10.1021/acssuschemeng.4c00782
[106] S. Kalidhasan, A. Santhana Krishna Kumar, V. Rajesh, N. Rajesh, The journey traversed in the remediation of hexavalent chromium and the road ahead toward greener alternatives - A perspective, Coordination Chemistry Reviews 317 (2016) 157-166. https://doi.org/10.1016/j.ccr.2016.03.004 DOI: https://doi.org/10.1016/j.ccr.2016.03.004
[107] Y. Morozov, V. Gur’yanov, G. Tikhomirova, N. Beljaeva, Epoxy coatings modified with a new cerium phosphate inhibitor for smart corrosion protection of steel, Corrosion Science 159 (2019) 108128. https://doi.org/10.1016/j.corsci.2019.108128 DOI: https://doi.org/10.1016/j.corsci.2019.108128
[108] M. Gobara, A. Baraka, R. Akid, M. Zorainy, Corrosion protection mechanism of Ce4+ /organic inhibitor for AA2024 in 3.5 % NaCl, RSC Advances 10(4) (2020) 2227-2240. https://doi.org/10.1039/C9RA09552G DOI: https://doi.org/10.1039/C9RA09552G
[109] M. Kurtela, V. Šimunović, I. Stojanović, V. Alar, Effect of the cerium (III) chloride heptahydrate on the corrosion inhibition of aluminum alloy, Materials and Corrosion 71(1) (2020) 125-147. https://doi.org/10.1002/maco.201911057 DOI: https://doi.org/10.1002/maco.201911057
[110] M. A. Patel, B. A. Bhanvase, S. H. Sonawane, Production of cerium zinc molybdate nano pigment by innovative ultrasound assisted approach, Ultrasonics Sonochemistry 20(3) (2013) 906-913. https://doi.org/10.1016/j.ultsonch.2012.11.013 DOI: https://doi.org/10.1016/j.ultsonch.2012.11.008
[111] P. Rodič, I. Milošev, Corrosion resistance of cerium-conversion coatings formed from cerium(III) salts on aluminium alloy 7075-T6, Studia Universitatis Babeș-Bolyai Chemia 65(3) (2020) 227-244. https://doi.org/10.24193/subbchem.2020.3.18 DOI: https://doi.org/10.24193/subbchem.2020.3.18
[112] I. Milošev, B. Volarič, Conversion Coatings Based on Rare Earth Nitrates and Chlorides for Corrosion Protection of Aluminum Alloy 7075-T6, Corrosion 73(7) (2017) 822-843. https://doi.org/10.5006/2353 DOI: https://doi.org/10.5006/2353
[113] B. Volarič, A. Mazare, S. Virtanen, I. Milošev, The Effect of Deposition Parameters on the Properties of CeCl3 and LaCl3 Conversion Coatings Deposited on Three Al-Based Substrates, Corrosion 76(1) (2020) 18-38. https://doi.org/10.5006/3303 DOI: https://doi.org/10.5006/3303
[114] S. Kozhukharov, C. Girginov, Recent Trends of the Use of Rare Earth Elements for Efficient Environmentally Compliant Corrosion Protection of Aluminum and Its Alloys, in Nanoscience and Nanotechnology in Security and Protection against CBRN Threats. NATO Science for Peace and Security Series B, P. Petkov, M. Achour, M. Popov, Eds., Springer, Dordrecht, 2020 p, 37-445. https://doi.org/10.1007/978-94-024-2018-0_35 DOI: https://doi.org/10.1007/978-94-024-2018-0_35
[115] E.A. Matter, S. Kozhukharov, M. Machkova, V. Kozhukharov, Comparison between the inhibition efficiencies of Ce(III) and Ce(IV) ammonium nitrates against corrosion of AA2024 aluminum alloy in solutions of low chloride concentration, Corrosion Science 62 (2012) 22-33. https://doi.org/10.1016/j.corsci.2012.03.039 DOI: https://doi.org/10.1016/j.corsci.2012.03.039
[116] E.A. Matter, S. Kozhukharov, M. Machkova, V. Kozhukharov, Electrochemical studies on the corrosion inhibition of AA2024 aluminium alloy by rare earth ammonium nitrates in 3.5 % NaCl solutions, Materials and Corrosion 64(5) (2013) 408-414. https://doi.org/10.1002/maco.201106349 DOI: https://doi.org/10.1002/maco.201106349
[117] M. Machkova, E.A. Matter, S. Kozhukharov, V. Kozhukharov, Effect of the anionic part of various Ce(III) salts on the corrosion inhibition efficiency of AA2024 aluminium alloy, Corrosion Science 69 (2013) 396-405. https://doi.org/10.1016/j.corsci.2013.01.008 DOI: https://doi.org/10.1016/j.corsci.2013.01.008
[118] S. Kozhukharov, C. Griginov, Enhancement of the cerium oxide primer layers deposited on AA2024-T3 aircraft alloy by preliminary anodization, Journal of Electrochemical Science and Engineering 8(2) (2018) 113-127. https://doi.org/10.5599/jese.478 DOI: https://doi.org/10.5599/jese.478
[119] C. B. Breslin, G. Treacy, W. M. Carroll, Studies on the passivation of aluminium in chromate and molybdate solutions, Corrosion Science 36(7) (1994) 1143-1154. https://doi.org/10.1016/0010-938X(94)90139-2 DOI: https://doi.org/10.1016/0010-938X(94)90139-2
[120] K. Li, R. Yu, R. Zhu, R. Liang, G. Liu, B. Peng, pH-Sensitive and Chromium-Loaded Mineralized Nanoparticles as a Tanning Agent for Cleaner Leather Production, ACS Sustainable Chemistry & Engineering 7(9) (2019) 8660-8669. https://doi.org/10.1021/acssuschemeng.9b00482 DOI: https://doi.org/10.1021/acssuschemeng.9b00482
[121] H. Zhang, Z. Zhang, X. Wei, D. Li, J. Wang, Y. Lin, A multifunctional tripodal fluorescent probe for the recognition of Cr3+, Al3+, Zn2+ and F- with controllable ESIPT processes, Dyes and Pigments 162 (2019) 257-265. https://doi.org/10.1016/j.dyepig.2018.10.025 DOI: https://doi.org/10.1016/j.dyepig.2018.10.025
[122] E. Gralak, J. Szczepańska, K. Winiarska, W. Tylus, J. Winiarski, The effect of hexafluorozirconic acid concentration on the formation and corrosion resistance of trivalent chromium conversion coatings on AlSi12Cu1(Fe) cast alloy, Materials Today Communications 38 (2024) 108409. https://doi.org/10.1016/j.mtcomm.2024.108409 DOI: https://doi.org/10.1016/j.mtcomm.2024.108409
[123] M. Becker, Chromate-free chemical conversion coatings for aluminum alloys, Corrosion Reviews 37(4) (2019) 321-342. https://doi.org/10.1515/corrrev-2019-0032 DOI: https://doi.org/10.1515/corrrev-2019-0032
[124] P. Ahmadi, E. Darvish, M. H. Shahini, H. Eivaz Mohammadloo, M. Behzadnasab, R. Ghamsarizade, New hybrid organic-inorganic conversion coating applied on the Al2024 substrate: Electrochemical, adhesion and surface study, Journal of Alloys and Compounds 1010 (2025) 177033. https://doi.org/10.1016/j.jallcom.2024.177033 DOI: https://doi.org/10.1016/j.jallcom.2024.177033
[125] M. Wu, G. Cao, Z. Xiao, Polyimide-modified epoxy coatings reinforced with functional fillers for enhanced thermal stability and corrosion resistance, Advanced Composites and Hybrid Materials 8(2) (2025) 172. https://doi.org/10.1007/s42114-025-01265-6 DOI: https://doi.org/10.1007/s42114-025-01265-6
[126] U. Tiringer, A. Durán, Y. Castro, I. Milošev, Self-Healing Effect of Hybrid Sol-Gel Coatings Based on GPTMS, TEOS, SiO2 Nanoparticles and Ce(NO3)3 Applied on Aluminum Alloy 7075-T6, Journal of The Electrochemical Society 165(5) (2018) C213-C225. https://doi.org/10.1149/2.0211805jes DOI: https://doi.org/10.1149/2.0211805jes
[127] F. Peltier, D. Thierry, Review of Cr-Free Coatings for the Corrosion Protection of Aluminum Aerospace Alloys, Coatings 12(4) (2022) 518. https://doi.org/10.3390/coatings12040518 DOI: https://doi.org/10.3390/coatings12040518
[128] B. Shri Prakash, J. N. Balaraju, Chromate (Cr⁶⁺)-free surface treatments for active corrosion protection of aluminum alloys: a review, Journal of Coatings Technology and Research 21 (2024) 105-135. https://doi.org/10.1007/s11998-023-00831-1 DOI: https://doi.org/10.1007/s11998-023-00831-1
[129] N. D. Sakhnenko, M. V. Ved’, D. S. Androshchuk, S. A. Korniy, Formation of coatings of mixed aluminum and manganese oxides on the AL25 alloy, Surface Engineering and Applied Electrochemistry 52(2) (2016) 145-151. https://doi.org/10.3103/S1068375516020113 DOI: https://doi.org/10.3103/S1068375516020113
[130] C. Pehlivanoğlu, M. Ö. Öteyaka, E. Z. Hoşgün, Influence of trivalent chromium process (TCP) concentration on the anti-corrosion protection of 2024-T3 aluminium alloy, Canadian Metallurgical Quarterly 63(4) (2024) 1273-1285. https://doi.org/10.1080/00084433.2023.2251213 DOI: https://doi.org/10.1080/00084433.2023.2251213
[131] A.-E. Stamate, O. D. Pavel, R. Zavoianu, I.-C. Marcu, Highlights on the Catalytic Properties of Polyoxometalate-Intercalated Layered Double Hydroxides, Catalysts 10(1) (2020) 57. https://doi.org/10.3390/catal10010057 DOI: https://doi.org/10.3390/catal10010057
[132] H. Zhang, X. Zhang, X. Zhao, Y. Tang, Y. Zuo, Preparation of Ti-Zr-Based Conversion Coating on 5052 Aluminum Alloy, and Its Corrosion Resistance and Antifouling Performance, Coatings 8(11) (2018) 397. https://doi.org/10.3390/coatings8110397 DOI: https://doi.org/10.3390/coatings8110397
[133] W. Zhan, X. Liu, G. OuYang, Film-forming mechanism and properties of Ti/Zr/Mo colored conversion coating prepared on aluminum alloy, International Journal of Precision Engineering and Manufacturing-Green Technology 3(3) (2016) 297-302. https://doi.org/10.1007/s40684-016-0038-y DOI: https://doi.org/10.1007/s40684-016-0038-y
[134] Y. Xie, Z. Zhang, L. Jiang, P. Wang, Z. Xu, Functional Surface Coating to Enhance the Stability of LiNi0.6Mn0.2Co0.2O2 Batteries 9(10) (2023) 485. https://doi.org/10.3390/batteries9100485 DOI: https://doi.org/10.3390/batteries9100485
[135] X. Guo, S. Li, S. Dai, D. Liu, G. Yang, Understanding the layer composition, its origin and impact on the Al2O3 modified Nickel-rich layered oxide by quantitative analysis, Electrochimica Acta 518 (2025) 145779. https://doi.org/10.1016/j.electacta.2025.145779 DOI: https://doi.org/10.1016/j.electacta.2025.145779
[136] R. B. Figueira, C. J. R. Silva, E. V. Pereira, Organic-inorganic hybrid sol-gel coatings for metal corrosion protection: a review of recent progress, Journal of Coatings Technology and Research 12(1) (2015) 1-35. https://doi.org/10.1007/s11998-014-9595-6 DOI: https://doi.org/10.1007/s11998-014-9595-6
[137] D. Balgude, A. Sabnis, Sol-gel derived hybrid coatings as an environment friendly surface treatment for corrosion protection of metals and their alloys, Journal of Sol-Gel Science and Technology 64(1) (2012) 124-134. https://doi.org/10.1007/s10971-012-2838-z DOI: https://doi.org/10.1007/s10971-012-2838-z
[138] M. Talha, Y. Ma, M. Xu, Q. Wang, Y. Lin, X. Kong, Recent Advancements in Corrosion Protection of Magnesium Alloys by Silane-Based Sol-Gel Coatings, Industrial & Engineering Chemistry Research 59(45) (2020) 19840-19857. https://doi.org/10.1021/acs.iecr.0c03368 DOI: https://doi.org/10.1021/acs.iecr.0c03368
[139] A. Trentin, M. F. Montemor, J. Tedim, M. L. Zheludkevich, Barrier properties of high performance PMMA-silica anticorrosion coatings, Progress in Organic Coatings 138 (2020) 105398. https://doi.org/10.1016/j.porgcoat.2019.105398 DOI: https://doi.org/10.1016/j.porgcoat.2019.105398
[140] A.J. Vreugdenhil, V.J. Gelling, M.E. Woods, J.R. Schmelz, B.P. Enderson, The role of crosslinkers in epoxy-amine crosslinked silicon sol-gel barrier protection coatings, Thin Solid Films 517(2) (2008) 538-543. https://doi.org/10.1016/j.tsf.2008.06.073 DOI: https://doi.org/10.1016/j.tsf.2008.06.073
[141] S.R. Davis, A.R. Brough, A. Atkinson, Formation of silica/epoxy hybrid network polymers, Journal of Non-Crystalline Solids 315 (2003) 197-205. https://doi.org/10.1016/S0022-3093(02)01431-X DOI: https://doi.org/10.1016/S0022-3093(02)01431-X
[142] M.S. Donley, R.A. Mantz, A.N. Khramov, V.N. Balbyshev, L.S. Kasten, D.J. Gaspar, The self-assembled nanophase particle (SNAP) process: A nanoscience approach to coatings, Progress in Organic Coatings 47 (2003) 401-415. https://doi.org/10.1016/j.porgcoat.2003.08.017 DOI: https://doi.org/10.1016/j.porgcoat.2003.08.017
[143] B. Indumathy, P. Sathiyanathan, G. Prasad, M. S. Reza, A. A. Prabu, H. Kim, A Comprehensive Review on Processing, Development and Applications of Organofunctional Silanes and Silane-Based Hyperbranched Polymers, Polymers 15(11) (2023) 2517. https://doi.org/10.3390/polym15112517 DOI: https://doi.org/10.3390/polym15112517
[144] X. Dong, Y. Wang, R. Guan, J. Ren, Z. Xie, Silane‐Functionalized Carbon Dots and Their Polymerized Hybrids: From Optoelectronics to Biotherapy, Small 17(50) (2021) 2105273. https://doi.org/10.1002/smll.202105273 DOI: https://doi.org/10.1002/smll.202105273
[145] R. Yadav, A. K. Verma, A. Pratap Singh, S. K. Shukla, S. K. Awasthi, Recent Advances in the Preparation and Applications of Organo‐functionalized Porous Materials, Chemistry - An Asian Journal 15(17) (2020) 2588-2621. https://doi.org/10.1002/asia.202000651 DOI: https://doi.org/10.1002/asia.202000651
[146] R. Figueira, I. Fontinha, C. Silva, E. Pereira, Hybrid Sol-Gel Coatings: Smart and Green Materials for Corrosion Mitigation, Coatings 6(1) (2016) 12. https://doi.org/10.3390/coatings6010012 DOI: https://doi.org/10.3390/coatings6010012
[147] N. N. Voevodin, J. W. Kurdziel, R. Mantz, Corrosion protection for aerospace aluminum alloys by Modified Self-assembled Nanophase Particle (MSNAP) sol-gel, Surface and Coatings Technology 201(3-4) (2006) 1080-1084. https://doi.org/10.1016/j.surfcoat.2006.01.028 DOI: https://doi.org/10.1016/j.surfcoat.2006.01.028
[148] R. B. Figueira, C. J. R. Silva, Application of Sol-Gel Method to Synthesize Organic-Inorganic Hybrid Coatings to Minimize Corrosion, in Metallic Substrates, in Hybrid Organic‐Inorganic Interfaces: Towards Advanced Functional Materials, M.-H. Delville, A. Taubert, Eds., Wiley‐VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2018, 355-412. https://doi.org/10.1002/9783527807130.ch8 DOI: https://doi.org/10.1002/9783527807130.ch8
[149] S. Kozhukharov, V. Kozhukharov, M. Wittmar, M. Schem, M. Aslan, H. Caparrotti, M. Veith, Protective abilities of nanocomposite coatings containing Al2O3 nano-particles loaded by CeCl3, Progress in Organic Coatings 71(2) (2011) 198-205. https://doi.org/10.1016/j.porgcoat.2011.02.013 DOI: https://doi.org/10.1016/j.porgcoat.2011.02.013
[150] G. Tsaneva, V. Kozhukharov, S. Kozhukharov, M. Ivanova, J. Gerwann, M. Schem, T. Schmidt, Functional nanocomposite coatings for corrosion protection of aluminum alloy and steel, Journal of the University of Chemical Technology and Metallurgy 43(2) (2008) 231-238. https://journal.uctm.edu/node/j2008-2/9_Kojukharov_231.pdf
[151] C. Girginov, S. Portolesi, S. Kozhukharov, A. Tsanev, E. Lilov, P. Petkov, Selection of appropriate electrochemical deposition regime for cerium conversion coating on anodized AA2024-T3 aircraft alloy, Journal of Applied Electrochemistry 54(5) (2024) 1171-1202. https://doi.org/10.1007/s10800-023-02012-9 DOI: https://doi.org/10.1007/s10800-023-02012-9
[152] S. Kozhukharov, C. Girginov, S. Portolesi, A. Tsanev, V. Lilova, P. Petkov, Optimal current density for cathodic CeCC deposition on anodized AA2024-T3 aircraft alloy, Journal of Applied Electrochemistry 54(12) (2024) 2887-2918. https://doi.org/10.1007/s10800-024-02143-7 DOI: https://doi.org/10.1007/s10800-024-02143-7
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Bhavana Rikhari, Kudur Jayaprakash, P. Amaravathy
This work is licensed under a Creative Commons Attribution 4.0 International License.
