Tool wear rate during electrical discharge machining for aluminium metal matrix composite prepared by squeeze casting: A prospect as a biomaterial
Original scientific paper
DOI:
https://doi.org/10.5599/jese.1391Keywords:
Box Behnken design, hardness, tensile strength, response surface methodology, desirability analysis
Abstract
Squeeze casting was used to prepare aluminium alloy-6061/titanium diboride (TiB2) to create a composite with varied TiB2 quantities. The metallographic structure, tensile strength, and hardness of the composite have been explored. The tensile strength and hardness of produced metal matrix composites increased when a particle of TiB2 was increased from 5 to 10 vol.%. This study uses electrical discharge machining (EDM) to investigate the output response tool wear rate (TWR). Variables in EDM operation were investigated, such as current, pulse on time, and voltage gap. The experiments were designed using the Box–Behnken strategy. Statistical approaches were used to analyse the experiments. At ideal settings for TiB2 concentrations of 5 and 10 vol.%, TWR was 0.2146 and 0.1749 mm3 min-1 and surface roughness was 2.47 and 3.03 µm, respectively. TiB2 is utilized in automobile disc brakes, an industry where components slide against each other. The aluminium alloy-6061/titanium diboride has many applications as biomaterial and good prospect.
Downloads
References
S. Lakshmi, L. Lu, M. Gupta, Journal of Materials Processing Technology 73(1) (1998) 160-166. https://doi.org/10.1016/S0924-0136(97)00225-2
S. Natarajan, R. Narayanasamy, S. P. Kumaresh Babu, G. Dinesh, B. Anil Kumar, K. Sivaprasad, Materials & Design 30(7) (2009) 2521-2531. https://doi.org/10.1016/j.matdes.2008.09.037
N. Ehsania, F. Abdib, H. Abdizadehc, H. R. Baharvandid, International Conference on Smart Materials and Nanotechnology in Engineering, Proceedings 6423 (2008) 642369. https://doi.org/10.1117/12.791738
J. Hashim, Jurnal Teknologi 35(A)(2001) 9-20. https://doi.org/10.11113/jt.v35.588
B. Bobić, S. Mitrovic, M. Babic, I. Bobić, Tribology in Industry 32 (2010) 3-11. http://www.tribology.rs/journals/2010/2010-1/1.pdf
S. C. Tjong, K. F. Tam, Materials Chemistry and Physics 97(1) (2006) 91-97. https://doi.org/10.1016/j.matchemphys.2005.07.075
S. Suresh, N. Shenbaga Vinayaga Moorthi, S. C. Vettivel, N. Selvakumar, Materials & Design 59 (2014) 383-396. https://doi.org/10.1016/j.matdes.2014.02.053
A. Baradeswaran,A. Elaya Perumal, Composites Part B: Engineering 54 (2013) 146-152. https://doi.org/10.1016/j.compositesb.2013.05.012
C. S. Ramesh, S. Pramod, R. Keshavamurthy, Materials Science and Engineering: A 528(12) (2011) 4125-4132. https://doi.org/10.1016/j.msea.2011.02.024
A. Torres, C. J. Luis, I. Puertas, Procedia Manufacturing 13 (2017) 579-584. https://doi.org/10.1016/j.promfg.2017.09.104
N. Eliaz,N. Metoki, Materials 10(4) (2017) 334. https://doi.org/10.3390/ma10040334
V. Guarino, M. Iafisco, S. Spriano, Nanostructured Biomaterials for Regenerative Medicine, Woodhead Publishing, Napoli, Italy 2020, p. 1-27.
T. J. Kinnari, J. Esteban, E. Gomez-Barrena, N. Zamora, R. Fernandez-Roblas, A. Nieto, J. C. Doadrio, A. López-Noriega, E. Ruiz-Hernández, D. Arcos, M. Vallet-Regí, Journal of Biomedical Material Research Part A 89A(1) (2009) 215-223. https://doi.org/10.1002/jbm.a.31943
J. Park, Bioceramics: Properties, Characterizations, and Applications, Springer Science & Business Media, lowa City, USA 2009, p.363. https://doi.org/10.1007/978-0-387-09545-5
M. Semlitsch, M. Lehmann, H. Weber, E. Doerre, H. G. Willert, Journal of Biomedical Materials Research 11(4) (1977) 537-552. https://doi.org/10.1002/jbm.820110409
C. Combes, C. Rey, Bioceramics in Ceramic Materials, Philippe Boch, Jean-Claude Niepce, ISTE Ltd London, UK 2007, p. 493-521.
R. Kumar, R. Dubey, S. Singh, S. Singh, C. Prakash, Y. Nirsanametla, G. Królczyk, R. Chudy Materials 14(8) (2021) 2084. https://www.mdpi.com/1996-1944/14/8/2084
C. Prakash, P. Senthil, N. Manikandan, D. Palanisamy, Materials and Manufacturing Processes 37(7) (2022) 748-763. https://doi.org/10.1080/10426914.2021.1962531
H. Nair, A. Pramanik, A. K. Basak, C. Prakash, S. Debnath, S. Shankar, A. R. Dixit, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2022). https://doi.org/10.1177/09544089221096025
P. Haja Syeddu Masooth, G. Bharathiraja, V. Jayakumar, K. Palani, Materials Research Express 9(4) (2022) 046521. https://doi.org/10.1088/2053-1591/ac672d
P. Haja Syeddu Masooth, V. Jayakumar, G. Bharathiraja, Materials Today: Proceedings 22 (2020) 726-736. https://doi.org//10.1016/j.matpr.2019.10.036
M. Das, K. Kumar, T. Barman, P. Sahoo, Procedia Materials Science 6 (2014) 741-751. https://doi.org/10.1016/j.mspro.2014.07.090
M. Dastagiri A. H. Kumar, Procedia Engineering 97 (2014) 1551-1564. https://doi.org/10.1016/j.proeng.2014.12.439
M. Durairaj, D. Sudharsun, N. Swamynathan, Procedia Engineering 64 (2013) 868-877. https://doi.org/10.1016/j.proeng.2013.09.163
M. Azadi Moghaddan, F. Kolahan, International Journal of Engineering 27(3) (2014) 417-424.
A. K. Bodukuri, S. Chandramouli, K. Eswaraiah, J. Laxman, Materials Today: Proceedings 5(11,3) (2018) 24731-24740. https://doi.org/10.1016/j.matpr.2018.10.271
S. Mohanty, B. C. Routara, R. K. Bhuayan, Materials Today: Proceedings 4(8) (2017) 8778-8787. https://doi.org/10.1016/j.matpr.2017.07.227
S. Mahanta, M. Chandrasekaran, S. Samanta, Materials Today: Proceedings 5(2) (2018) 7788-7796. https://doi.org/10.1016/j.matpr.2017.11.457
K. R. Aharwal, Sitaram, C. M. Krishna, Materials Today: Proceedings 5(2,1) (2018) 5391-5397. https://doi.org/10.1016/j.matpr.2017.12.125
N. Radhika, S. Addamane, G. Chandran, Journal of Engineering Science and Technology 9 (2014) 502-512.
M. Prabu, G. Ramadoss, P. Narendersingh, T. V. Christy, V. V. Eswaran, Science and Engineering of Composite Materials 21(3) (2014) 445-452. https://doi.org/doi:10.1515/secm-2013-0023
P. Senthil, S. Vinodh, A. Singh, International Journal of Machining and Machinability of Materials 16 (2014) 80-94. https://doi.org/10.1504/IJMMM.2014.063922
R. Kumar H. K. Channi, Journal of Cleaner Production 349 (2022) 131347. https://doi.org/10.1016/j.jclepro.2022.131347
A. S. Walia, V. Srivastava, M. Garg, N. Somani, N. K. Gupta, C. Prakash, C. Bhargava, K. Kotecha, Materials 14(20) (2021) 5943. https://doi.org/10.3390/ma14205943
A. Sharma, V. Kumar, A. Babbar, V. Dhawan, K. Kotecha, C. Prakash, Materials 14(19) (2021) 5820 . https://doi.org/10.3390/ma14195820
A. Pramanik, A. K. Basak, C. Prakash, S. Shankar, S. Sharma, S. Narendranath, Journal of Materials Engineering and Performance 30(12) (2021) 8926-8935. https://doi.org/10.1007/s11665-021-06116-1
M. Dutt Sharma, R. Sehgal, M. Pant, Journal of Tribology 138(3) (2016) 031603. https://doi.org/10.1115/1.4032518
C. Prakash, H. K. Kansal, B. S. Pabla, S. Puri, Journal of Materials Engineering and Performance 24(9) (2015) 3622-3633. https://doi.org/10.1007/s11665-015-1619-6
C. Prakash, H. K. Kansal, B. S. Pabla, S. Puri, Journal of Computing and Information Science in Engineering 16(4) (2016) 041006. https://doi.org/10.1115/1.4033901
C. Prakash, H. K. Kansal, B. S. Pabla, S. Puri, Nanoscience and Nanotechnology Letters 8(10) (2016) 815-826. https://doi.org/10.1166/nnl.2016.2255
C. Prakash, H. K. Kansal, B. S. Pabla, S. Puri, Journal of Mechanical Science and Technology 30(9) (2016) 4195-4204. https://doi.org/10.1007/s12206-016-0831-0
H. Kaur Channi, M. Singh, Y. Singh Brar, A. Dhingra, S. Gupta, H. Singh, R. Kumar, S. Kaur, Materials Today: Proceedings 50(5) (2022) 700-708. https://doi.org/10.1016/j.matpr.2021.04.481
C. Prakash, H. K. Kansal, B. S. Pabla, S. Puri, A. Aggarwal, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230(2) (2016) 331-353. https://doi.org/10.1177/0954405415579113
A. A. Aliyu, A. M. Abdul-Rani, T. L. Ginta, C. Prakash, E. Axinte, M. A. Razak, S. Ali, Advances in Materials Science and Engineering 2017 (2017) 8723239. https://doi.org/10.1155/2017/8723239
C. Prakash, H. K. Kansal, B. S. Pabla, S. Puri, Materials and Manufacturing Processes 32(3) (2017) 274-285. https://doi.org/10.1080/10426914.2016.1198018
C. Prakash M. S. Uddin, Surface and Coatings Technology 326 (2017) 134-145. https://doi.org/10.1016/j.surfcoat.2017.07.040
C. Prakash, S. Singh, B. S. Pabla, M. S. Uddin, Surface and Coatings Technology 346 (2018) 9-18. https://doi.org/10.1016/j.surfcoat.2018.04.035
C. Prakash, S. Singh, M. Singh, K. Verma, B. Chaudhary, S. Singh, Vacuum 158 (2018) 180-190. https://doi.org/10.1016/j.vacuum.2018.09.050
A. Pramanik, M. N. Islam, A. K. Basak, Y. Dong, G. Littlefair, C. Prakash, Materials and Manufacturing Processes 34(10) (2019) 1083-1090. https://doi.org/10.1080/10426914.2019.1628259
K. K. Goyal, N. Sharma, R. D. Gupta, G. Singh, D. Rani, H. K. Banga, R. Kumar, D. Y. Pimenov, K. Giasin, Materials 15(2) (2022) 635. https://doi.org/10.3390/ma15020635
A. S. Sidhu, S. Singh, R. Kumar, D. Y. Pimenov, K. Giasin, Energies 14(16) (2021) 4761. https://doi.org/10.3390/en14164761
S. Singh, R. Kumar, R. Kumar, J. S. Chohan, N. Ranjan, R. Kumar, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236(3) (2022) 674-691. https://doi.org/10.1177/14644207211054143
R. Kumar, S. Singh, V. Aggarwal, S. Singh, D. Y. Pimenov, K. Giasin, K. Nadolny, Materials 15(4) (2022) 1287. https://doi.org/10.3390/ma15041287
P. Antil, S. Kumar Antil, C. Prakash, G. Królczyk, C. Pruncu, Measurement and Control (United Kingdom) 53(9-10) (2020) 1902-1910. https://doi.org/10.1177/0020294020947126
A. Kumar, N. Grover, A. Manna, J. S. Chohan, R. Kumar, S. Singh, C. Prakash, C. I. Pruncu, Advanced Composites Letters 29 (2020). https://doi.org/10.1177/2633366x20963137
A. Basak, A. Pramanik, C. Prakash, K. Kotecha, Materials Letters 305 (2021) 130769. https://doi.org/10.1016/j.matlet.2021.130769
G. Singh, S. Singh, C. Prakash, R. Kumar, R. Kumar, S. Ramakrishna, Polymer Composites 41(9) (2020) 3871-3891. https://doi.org/10.1002/pc.25683
K. Sandhu, G. Singh, S. Singh, R. Kumar, C. Prakash, S. Ramakrishna, G. Królczyk, C. I. Pruncu, Materials, 13(12) (2020) 2729. https://doi.org/10.3390/ma13122729
R. Kumar, S. Singh, P. S. Bilga, Jatin, J. Singh, S. Singh, M. L. Scutaru, C. I. Pruncu, Journal of Materials Research and Technology 10 (2021) 1471-1492. https://doi.org/10.1016/j.jmrt.2020.12.114
R. Kumar, P. S. Bilga, S. Singh, Procedia CIRP 98 (2021) 654-659. https://doi.org/10.1016/j.procir.2021.01.170
R. S. Chandel, R. Kumar, J. Kapoor, Materials Today: Proceedings 50(5) (2022) 716-727. https://doi.org/10.1016/j.matpr.2021.04.624
R. Kumar, P. S. Bilga, S. Singh, International Journal of Metallurgy Alloys 6(1) (2020) 37-45. https://doi.org/10.37628/ijma.v6i1.632
S. Singh, R. Kumar, R. Kumar, J. S. Chohan, N. Ranjan, R. Kumar, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236(3) (2021) 674-691. https://doi.org/10.1177/14644207211054143
R. Kumar, R. Singh, M. S. J. Hashmi, Advances in Materials and Processing Technologies (2022) 895-908. https://doi.org/10.1080/2374068X.2020.1835013
G. Singh, S. Singh, C. Prakash, R. Kumar, R. Kumar, S. J. P. C. Ramakrishna, Polymer Composites 41(9) (2020) 3871-3891. https://doi.org/https://doi.org/10.1002/pc.25683
Downloads
Published
How to Cite
Issue
Section
License
Articles are published under the terms and conditions of the
Creative Commons Attribution license 4.0 International.
