Application of MWCNTs/Uio-66(Zr)-NH₂ MOF modified electrode for anodic stripping determination of Cu(II) in water samples

Original scientific paper

Authors

DOI:

https://doi.org/10.5599/jese.3156

Keywords:

Heavy metal ions determination, Cu(II) ions, environmental monitoring, chemically modified electrode, voltammetric sensor

Abstract

In this research, a procedure was developed for the detection of Cu(II) ions in water using a glassy carbon electrode modified with a nanocomposite of multi-walled carbon nanotubes and a zirconium-based metal-organic framework (MWCNTs/Uio-66(Zr)-NH₂ MOF/GCE). The analysis was performed by differential pulse anodic stripping voltammetry. The excellent sensitivity of the created sensor (MWCNTs/Uio-66(Zr)-NH₂ MOF/GCE) for Cu(II) determi­nation is attributed to the synergy between the strong chelating ability of the terminal amino groups (-NH₂) on the Uio-66 (Zr)-NH₂ MOF for metal ions and the extensive surface area provided by the MWCNTs. The key parameters influencing the stripping current res­ponse of Cu(II), namely, pH, accumulation potential, and accumulation time, were syste­ma­tically studied and optimized. Under optimal conditions, the stripping peak current of Cu(II) ions exhibited a linear relationship with concentration over the range of 0.001 to 10.0 μM. The limit of detection for Cu(II) ions was calculated to be 0.0005 μM. Finally, the MWCNTs/Uio-66 (Zr)-NH₂ MOF/GCE sensor was employed to determine Cu(II) ions in real water specimens, yielding acceptable recovery rates.

Downloads

Download data is not yet available.

References

[1] . F. Sulthana, U. M. Iqbal, S. B. Suseela, R. Anbazhagan, R. Chinthaginjala, D. Chitathuru, T. H. Kim, Electrochemical sensors for heavy metal ion detection in aqueous medium: a systematic review, ACS Omega 9 (2024) 25493-25512. https://doi.org/10.1021/acsomega.4c00933

[2] X. Dai, S. Wu, S. Li, Progress on electrochemical sensors for the determination of heavy metal ions from contaminated water, Journal of the Chinese Advanced Materials Society 6 (2018) 91-111. https://doi.org/10.1080/22243682.2018.1425904

[3] G. Aragay, J. Pons, A. Merkoçi, Recent trends in macro-, micro-, and nanomaterial-based tools and strategies for heavy-metal detection, Chemical Review 111 (2011) 3433-3458. https://doi.org/10.1021/cr100383r)

[4] C. Vedhi, G. Selvanathan, P. Arumugam, P. Manisankar, Electrochemical sensors of heavy metals using novel polymer-modified glassy carbon electrodes, Ionics 15 (2009) 377-383. https://doi.org/10.1007/s11581-008-0277-1

[5] T. Zhang, C. Li, B. Mao, Y. An, Determination of Cd2+ by ultrasound-assisted square wave anodic stripping voltammetry with a boron-doped diamond electrode, Ionics 21 (2015) 1761-1769. https://doi.org/10.1007/s11581-014-1350-6

[6] M. Nasiri-Majd, M. A. Taher, H. Fazelirad, Preparation and application of a simple electrochemical sensor for the determination of copper in some real and standard samples, Ionics 22 (2016) 289-296. https://doi.org/10.1007/s11581-015-1533-9

[7] M. Ghaedi, F. Ahmadi, A. Shokrollahi, Simultaneous preconcentration and determination of copper, nickel, cobalt and lead ions content by flame atomic absorption spectrometry, Journal of Hazardous Materials 142 (2007) 272-278. https://doi.org/10.1016/j.jhazmat.2006.08.012

[8] Y. J. Tseng, Y. D. Tsai, S. J. Jiang, Electrothermal vaporization dynamic reaction cell inductively coupled plasma mass spectrometry for the determination of Fe, Co, Ni, Cu, and Zn in biological samples, Analytical and Bioanalytical Chemistry 387 (2007) 2849-2855. https://doi.org/10.1007/s00216-007-1143-0

[9] S. Qader, A. Mohammed, A. M. Muhammed, R. Omer, A. Qader, Determination of Three Metal Ions (Cu2+, Pb2+, Cd2+) by Ultraviolet-visible Spectroscopy, Journal of Physical Chemistry and Functional Materials 7 (2024) 88-100. https://doi.org/10.54565/jphcfum.1535225

[10] S. Zhang, T. Yu, M. Sun, H. Yu, Z. Zhang, S. Wang, H. Jiang, Highly sensitive and selective fluorescence detection of copper (II) ion based on multi-ligand metal chelation, Talanta 126 (2014) 185-190. https://doi.org/10.1016/j.talanta.2014.03.076

[11] H. Yang, H. Yuan, S. Li, W. Wang, D. Yang, In situ detection of trace heavy metal Cu in water by atomic emission spectrometry of nebulized discharge plasma at atmospheric pressure, Applied Sciences 12 (2022) 4939. https://doi.org/10.3390/app12104939

[12] M. Stoytcheva, Z. Velkova, V. Gochev, B. Valdez, M. Curiel, Advances in electrochemical sensors for paracetamol detection: Electrode materials, modifications, and analytical applications, International Journal of Electrochemical Science 20 (2025) 100924. https://doi.org/10.1016/j.ijoes.2024.100924

[13] S. E. Elugoke, O. E. Fayemi, A. S. Adekunle, B. B. Mamba, T. T. Nkambule, E. E. Ebenso, Electrochemical sensor for the detection of dopamine using carbon quantum dots/copper oxide nanocomposite modified electrode, FlatChem 33 (2022) 100372. https://doi.org/10.1016/j.flatc.2022.100372

[14] L. E. Rebolledo-Perales, G. A. Á. Romero, I. Ibarra, C. A. Galán-Vidal, J. F. Flores-Aguilar, I. Pérez-Silva, Quantitative analysis of Pb (II) based on differential pulse anodic stripping voltammetry and IIP-carbon paste electrodes, Journal of The Electrochemical Society 169 (2022) 057504. DOI 10.1149/1945-7111/ac6a17

[15] Z. Lai, F. Lin, Y. Huang, Y. Wang, X. Chen, Automated determination of Cd2+ and Pb2+ in natural waters with sequential injection analysis device using differential pulse anodic stripping voltammetry, Journal of Analysis and Testing 5 (2021) 60-68. https://doi.org/10.1007/s41664-021-00165-0

[16] Y. Xia, Y. Ma, Y. Wu, Y. Yi, H. Lin, G. Zhu, Free-electrodeposited anodic stripping voltammetry sensing of Cu (II) based on Ti3C2Tx MXene/carbon black, Microchimica Acta 188 (2021) 377. https://doi.org/10.1007/s00604-021-05042-2

[17] W. Zhong, J. Zou, Q. Yu, Y. Gao, F. Qu, S. Liu, L. Lu, Ultrasensitive indirect electrochemical sensing of thiabendazole in fruit and water by the anodic stripping voltammetry of Cu2+ with hierarchical Ti3C2Tx-TiO2 for signal amplification, Food Chemistry 402 (2023) 134379. https://doi.org/10.1016/j.foodchem.2022.134379

[18] N. Mohamad Nor, N. H. Ramli, H. Poobalan, K. Qi Tan, K. Abdul Razak, Recent advancement in disposable electrode modified with nanomaterials for electrochemical heavy metal sensors, Critical Reviews in Analytical Chemistry, 53 (2023) 253-288. https://doi.org/10.1080/10408347.2021.1950521

[19] C. Gibi, C. H. Liu, S. C. Barton, J. J. Wu, Recent progress in morphology-tuned nanomaterials for the electrochemical detection of heavy metals, Nanomaterials 12 (2022) 3930. https://doi.org/10.3390/nano12223930

[20] J. M. Gonçalves, P. R. Martins, D. P. Rocha, T. A. Matias, M. S. Juliao, R. A. Munoz, L. Angnes, Recent trends and perspectives in electrochemical sensors based on MOF-derived materials, Journal of Materials Chemistry C 9 (2021) 8718-8745. https://doi.org/10.1039/D1TC02025K

[21] R. R. Fonseca, R. de Q. Ferreira, P. P. Luz, MOF-modified electrodes applied as electrochemical sensors for voltammetric determinations, Journal of Solid State Electrochemistry 29 (2025) 837-854. https://doi.org/10.1007/s10008-024-05985-5

[22] W. Ye, Y. Li, J. Wang, B. Li, Y. Cui, Y. Yang, G. Qian, Electrochemical detection of trace heavy metal ions using a Ln-MOF modified glass carbon electrode, Journal of Solid State Chemistry 281 (2020) 121032. https://doi.org/10.1016/j.jssc.2019.121032

[23] M. Devaraj, Y. Sasikumar, S. Rajendran, L. C. Ponce, Metal organic framework based nanomaterials for electrochemical sensing of toxic heavy metal ions: progress and their prospects, Journal of The Electrochemical Society 168 (2021) 037513. https://doi.org/10.1149/1945-7111/abec97

[24] K. Doloi, N. Badhai, D. Mohanta, Nanoscale Ag2O decorated UiO-66 metal organic framework for simultaneous electrochemical sensing of heavy metals, Cd2+ and Hg2+, Materials Research Bulletin 170 (2024) 112558. https://doi.org/10.1016/j.materresbull.2023.112558

[25] D. Huo, Y. Zhang, N. Li, W. Ma, H. Liu, G. Xu, C. Hou, Three-dimensional graphene/amino-functionalized metal–organic framework for simultaneous electrochemical detection of Cd (II), Pb (II), Cu (II), and Hg (II), Analytical and Bioanalytical Chemistry 414 (2022) 1575-1586. https://doi.org/10.1007/s00216-021-03779-6

[26] O. A. Rafea, A. M. Abdel-Aziz, M. A. Sayed, R. M. Abdelhameed, I. H. Badr, Enhanced simultaneous voltammetric detection of lead, copper, and mercury using a MIL-101 (Cr)-(COOH)2@ MWCNTs modified glassy carbon electrode, Analytica Chimica Acta 1338 (2025) 343600. https://doi.org/10.1016/j.aca.2024.343600

[27] G. Wang, T. Tang, R. Liu, J. Li, Y. Xu, S. Liao, Novel electrochemical sensor based on Cu-MOF/MWCNT-COOH for the simultaneous detection of ascorbic acid and dopamine, Langmuir 41 (2025) 4102-4112. https://doi.org/10.1021/acs.langmuir.4c04455

[28] H. Liu, M. Zhang, H. Zhao, Y. Jiang, G. Liu, J. Gao, Enhanced dispersibility of metal–organic frameworks (MOFs) in the organic phase via surface modification for TFN nanofiltration membrane preparation, RSC Advances 10 (2020) 4045-4057. https://doi.org/10.1039/C9RA09672H

[29] Y. Li, Y. Shen, Y. Zhang, T. Zeng, Q. Wan, G. Lai, N. Yang, A UiO-66-NH2/carbon nanotube nanocomposite for simultaneous sensing of dopamine and acetaminophen, Analytica Chimica Acta 1158 (2021) 338419. https://doi.org/10.1016/j.aca.2021.338419

Downloads

Published

05-05-2026

Issue

Section

Electroanalytical chemistry

How to Cite

Application of MWCNTs/Uio-66(Zr)-NH₂ MOF modified electrode for anodic stripping determination of Cu(II) in water samples: Original scientific paper. (2026). Journal of Electrochemical Science and Engineering, 16, 3156. https://doi.org/10.5599/jese.3156