Microstructure and electrochemical corrosion behaviour of API 5L X90 pipeline steel in a simulated soil environment
Original scientific paper
DOI:
https://doi.org/10.5599/jese.2726Keywords:
Near-neutral simulated soil solution, electrochemical corrosion tests, microstructural analysis, surface morphology, steel pipesAbstract
API 5L X90 pipeline steel, valued for its high strength in oil and gas pipelines, is susceptible to corrosion in aggressive soil environments containing moisture, chlorides, and other corrosive agents. This study aims to investigate the electrochemical corrosion behaviour of this steel in a simulated soil solution to understand its corrosion mechanisms and pipeline durability. The research employs electrochemical techniques, including electrochemical impedance spectroscopy, electrochemical noise and potentiodynamic polarization testing. Microstructural analysis showed that the composition of the steel, consisting of elongated ferrite grains, polygonal ferrite, granular bainite, and small amounts of martensite-austenite (MA), significantly influences its corrosion behaviour. EIS results indicated the presence of multiple time constants due to various oxide films and corrosion products, which hindered the penetration of corrosive species over time. As a result of corrosion products forming on the active sites and rendering them inactive, the charge transfer resistance increased by approximately 1.5 times. Potentiodynamic polarization tests indicated an absence of passivation, accompanied by a decrease in corrosion current density and a shift in corrosion potential toward the cathodic direction during immersion. Surface analysis after 100 hours identified localized corrosion, including cracks and pits, which pose risks to the steel’s structural integrity. The findings emphasize the need to understand the corrosion processes and their impact on impedance characteristics, advocating for targeted corrosion prevention and treatment strategies to enhance pipeline longevity and reliability.
Downloads
References
[1] U. Bharatiya, P. Gal, A. Agrawal, M. Shah, A. Sircar, Effect of Corrosion on Crude Oil and Natural Gas Pipeline with Emphasis on Prevention by Ecofriendly Corrosion Inhibitors, Journal of Bio- and Tribo-Corrosion 5 (2019) 35. https://doi.org/10.1007/s40735-019-0225-9 DOI: https://doi.org/10.1007/s40735-019-0225-9
[2] A. Golchinvafa, S.H. Mousavi Anijdan, M. Sabzi, M. Sadeghi, The effect of natural inhibitor concentration of Fumaria officinalis and temperature on corrosion protection mechanism in API X80 pipeline steel in 1 M H2SO4 solution, International Journal of Pressure Vessels and Piping 188 (2020) 104241. https://doi.org/10.1016/j.ijpvp.2020.104241 DOI: https://doi.org/10.1016/j.ijpvp.2020.104241
[3] R. Branco, F. Berto, Mechanical Behavior of High-Strength, Low-Alloy Steels, Metals (Basel) 8 (2018) 610. https://doi.org/10.3390/met8080610 DOI: https://doi.org/10.3390/met8080610
[4] M. Yeganeh, Y. Heydarie, Z. Shahryari, N. Asadi, H. Kahkesh, H. Ramezanalizadeh, Corrosion Inhibitor of API Pipeline Steels, Journal of Bio- and Tribo-Corrosion 11 (2025) 44. https://doi.org/10.1007/s40735-025-00965-2 DOI: https://doi.org/10.1007/s40735-025-00965-2
[5] F. Kolawole, S.K.K. Kolawole, J. Agunsoye, J. Adebisi, S. Bello, S. Hassan, Mitigation of Corrosion Problems in API 5L Steel Pipeline, Journal of Materials and Environmental Science 9 (2018) 2397-2410. https://www.jmaterenvironsci.com/Document/vol9/vol9_N8/264-JMES-2611-Kolawole.pdf
[6] S. K. Sharma, S. Maheshwari, A review on welding of high strength oil and gas pipeline steels, Journal of Natural Gas Science and Engineering 38 (2017) 203-217. https://doi.org/10.1016/j.jngse.2016.12.039 DOI: https://doi.org/10.1016/j.jngse.2016.12.039
[7] J. Enani, Corrosion control in oil and gas pipeline, Pipeline Gas Journal 7 (2016) 1161-1164. https://www.scribd.com/document/361624759/Corrosion-Control-in-Oil-and-Gas-Pipelines
[8] L. M. Alcantar-Martínez, P. A. Ruiz-Trabolsi, R. Tadeo-Rosas, Improving the Surface Properties of an API 5L Grade B Pipeline Steel by Applying the Boriding Process. Part I: Kinetics and Layer Characterization, Coatings 13 (2023) 298. https://doi.org/10.3390/coatings13020298 DOI: https://doi.org/10.3390/coatings13020298
[9] M. Nnoka, T.A. Jack, J. Szpunar, Effects of different microstructural parameters on the corrosion and cracking resistance of pipeline steels, Engineering Failure Analysis 159 (2024) 108065. https://doi.org/10.1016/j.engfailanal.2024.108065 DOI: https://doi.org/10.1016/j.engfailanal.2024.108065
[10] X. Wang, D. Wang, C. Deng, C. Li, Effect of H2S Corrosion on the Fracture Toughness of the X80 Pipeline Steel Welded Joint, Materials (Basel) 15 (2022) 4458. https://doi.org/10.3390/ma15134458 DOI: https://doi.org/10.3390/ma15134458
[11] D. G. Stalheim, K. R. Barnes, D. B. Mccutcheon, International Symposium on Microalloyed Steels for the Oil and gas, Alloy Designs for High Strength Oil and Gas Transmission Linepipe Steels, United States, 2007, p. 73. https://niobium.tech/-/media/niobiumtech/attachments-biblioteca-tecnica/nt_alloy-designs-for-high-strength-oil-and-gas-transmission-linepipe-steels.pdf DOI: https://doi.org/10.1115/IPC2006-10091
[12] N. Nanninga, A. Slifka, Y. Levy, M. R. Division, C. White, A Review of Fatigue Crack Growth for Pipeline Steels Exposed to Hydrogen, Journal of Research of the National Institute of Standards and Technology 115 (2010) 437-452. https://doi.org/10.6028/jres.115.030 DOI: https://doi.org/10.6028/jres.115.030
[13] D. B. Rosado, W. De Waele, D. Vanderschueren, Latest developments in mechanical properties and metallurgical features of high strength line pipe steels, International Journal of Sustainable Construction & Design 4 (2013) 1-10. https://doi.org/10.21825/scad.v4i1.742 DOI: https://doi.org/10.21825/scad.v4i1.742
[14] J. Luo, L. Zhang, L. Li, F. Yang, W. Ma, K. Wang, X. Zhao, Electrochemical corrosion behaviors of the X90 linepipe steel in NS4 solution, Natural Gas Industry B 3 (2016) 346-351. https://doi.org/10.1016/j.ngib.2016.12.011 DOI: https://doi.org/10.1016/j.ngib.2016.12.011
[15] J. Luo, S. Luo, L. Li, L. Zhang, G. Wu, L. Zhu, Stress corrosion cracking behavior of X90 pipeline steel and its weld joint at different applied potentials in near-neutral solutions, Natural Gas Industry B 6 (2019) 138-144. https://doi.org/10.1016/j.ngib.2018.08.002 DOI: https://doi.org/10.1016/j.ngib.2018.08.002
[16] H. Bi, J. Miao, C. Ma, C. Zhang, Y. Zhang, Y. Zhou, H. Li, H. Cheng, Combined acoustic emission and electrochemical methods for analyzing the uniform corrosion behavior of X90 high-grade steel pipelines, Ain Shams Engineering Journal 16 (2025) 103195. https://doi.org/10.1016/j.asej.2024.103195 DOI: https://doi.org/10.1016/j.asej.2024.103195
[17] M. Yeganeh, M. Omidi, T. Rabizadeh, Anti-corrosion behavior of epoxy composite coatings containing molybdate-loaded mesoporous silica, Progress in Organic Coatings 126 (2019) 18-27. https://doi.org/10.1016/j.porgcoat.2018.10.016 DOI: https://doi.org/10.1016/j.porgcoat.2018.10.016
[18] M. Yeganeh, I. Khosravi-Bigdeli, M. Eskandari, S. R. A. Zaree, Corrosion Inhibition of L-Methionine Amino Acid as a Green Corrosion Inhibitor for Stainless Steel in the H2SO4 Solution, Journal of Materials Engineering and Performance 29 (2020) 3983-3994. https://doi.org/10.1007/s11665-020-04890-y DOI: https://doi.org/10.1007/s11665-020-04890-y
[19] J. M. Reichert, T. Garcin, M. Militzer, W. J. Poole, Formation of Martensite/Austenite (M/A) in X80 Linepipe Steel, 9th International Pipeline Conference, Calgary, Canada, 2012: p. 483. https://doi.org/10.1115/IPC2012-90465 DOI: https://doi.org/10.1115/IPC2012-90465
[20] X. X. Dong, Y. F. Shen, Improving mechanical properties and corrosion resistance of 0 . 5 wt.% C TRIP steel by adjusting retained austenite stability and microstructural constituents, Materials Science and Engineering: A 852 (2022) 143737. https://doi.org/10.1016/j.msea.2022.143737 DOI: https://doi.org/10.1016/j.msea.2022.143737
[21] C. He, W. Yu, D. Tang, The effect of microstructure on the initial corrosion behavior of low carbon steel in simulated coal solution The effect of microstructure on the initial corrosion behavior of low carbon steel in simulated coal solution, Materials Research Express 11 (2024) 056518. https://doi.org/10.1088/2053-1591/ad4cb9 DOI: https://doi.org/10.1088/2053-1591/ad4cb9
[22] J. M. Zadeh, M. Yeganeh, S. Reza, A. Zaree, M. Khorasanian, Microstructure and corrosion behavior of Ti-10Cu fabricated by selective laser melting, Materials Today Communications 39 (2024) 109103. https://doi.org/10.1016/j.mtcomm.2024.109103 DOI: https://doi.org/10.1016/j.mtcomm.2024.109103
[23] M. Yeganeh, M. Saremi, Corrosion inhibition of magnesium using biocompatible Alkyd coatings incorporated by mesoporous silica nanocontainers, Progress in Organic Coatings 79 (2015) 25-30. https://doi.org/10.1016/j.porgcoat.2014.10.015 DOI: https://doi.org/10.1016/j.porgcoat.2014.10.015
[24] M. Yeganeh, M. T. Shoushtari, P. Jalali, Evaluation of the corrosion performance of selective laser melted 17-4 precipitation hardening stainless steel in Ringer ’ s solution, Journal of Laser Applicatoins 4 (2021) 042001. https://doi.org/10.2351/7.0000445 DOI: https://doi.org/10.2351/7.0000445
[25] M. Yeganeh, A. Keyvani, The effect of mesoporous silica nanocontainers incorporation on the corrosion behavior of scratched polymer coatings, Progress in Organic Coatings 90 (2016) 296-303. https://doi.org/10.1016/j.porgcoat.2015.11.006 DOI: https://doi.org/10.1016/j.porgcoat.2015.11.006
[26] M. H. Shaeri Karimi, M. Yeganeh, S. R. Alavi Zaree, M. Eskandari, Corrosion behavior of 316L stainless steel manufactured by laser powder bed fusion (L-PBF) in an alkaline solution, Optics & Laser Technology 138 (2021) 106918. https://doi.org/10.1016/j.optlastec.2021.106918 DOI: https://doi.org/10.1016/j.optlastec.2021.106918
[27] S. Mohammadali, J. Moghadas, M. Yeganeh, S. Reza, A. Zaree, M. Eskandari, The influence of heat treatment on the microstructure and corrosion behavior of selective laser melted 316L stainless steel in Ringer’s solution, Surface Topography: Metrology and Properties 10 (2022) 025012. https://doi.org/10.1088/2051-672X/ac6c42 DOI: https://doi.org/10.1088/2051-672X/ac6c42
[28] Z. Shahryari, K. Gheisari, M. Yeganeh, B. Ramezanzadeh, MoO4--doped oxidative polymerized pyrrole-graphene oxide core-shell structure synthesis and application for dual-barrier & active functional epoxy-coating construction, Progress in Organic Coatings 167 (2022) 106845. https://doi.org/10.1016/j.porgcoat.2022.106845 DOI: https://doi.org/10.1016/j.porgcoat.2022.106845
[29] M. Amirjan, M. Bozorg, H. Sakiani, Investigation of microstructure and corrosion behavior of IN718 superalloy fabricated by selective laser melting, Materials Chemistry and Physics 263 (2021) 124368. https://doi.org/10.1016/j.matchemphys.2021.124368 DOI: https://doi.org/10.1016/j.matchemphys.2021.124368
[30] M. Salehi, M. Yeganeh, R. B. Heidari, M. Eskandari, Comparison of the microstructure , corrosion resistance , and hardness of 321 and 310s austenitic stainless steels after thermo-mechanical processing, Materials Today Communications 31 (2022) 103638. https://doi.org/10.1016/j.mtcomm.2022.103638 DOI: https://doi.org/10.1016/j.mtcomm.2022.103638
[31] B. Hirschorn, M. E. Orazem, B. Tribollet, V. Vivier, I. Frateur, M. Musiani, Determination of effective capacitance and film thickness from constant-phase-element parameters, Electrochimica Acta 55 (2010) 6218-6227. https://doi.org/10.1016/j.electacta.2009.10.065 DOI: https://doi.org/10.1016/j.electacta.2009.10.065
[32] M. Yeganeh, M. H. Rezvani, S. M. Laribaghal, Electrochemical behavior of additively manufactured 316 L stainless steel in H2SO4 solution containing methionine as an amino acid, Colloids and Surfaces A: Physicochemical and Engineering Aspects 627 (2021) 127120. https://doi.org/10.1016/j.colsurfa.2021.127120 DOI: https://doi.org/10.1016/j.colsurfa.2021.127120
[33] A. Carmona-Hernandez, R. Orozco-Cruz, E. Mej, A. Espinoza-Vazquez, A. Contreras-Cuevas, R. Galvan-Martinez, Study of SCC of X70 Steel Immersed in Simulated Soil Solution at Different pH by EIS, Materials (Basel) 14 (2021) 7445. https://doi.org/10.3390/ma14237445 DOI: https://doi.org/10.3390/ma14237445
[34] R. A. Cottis, Interpretation of Electrochemical Noise Data, Corrosion 57 (2001) 265-285. https://doi.org/10.5006/1.3290350 DOI: https://doi.org/10.5006/1.3290350
[35] Z. Zhang, X. Yuan, Z. Zhao, X. Li, B. Liu, P. Bai, Electrochemical noise comparative study of pitting corrosion of 316L stainless steel fabricated by selective laser melting and wrought, Journal of Electroanalytical Chemistry 894 (2021) 115351. https://doi.org/10.1016/j.jelechem.2021.115351 DOI: https://doi.org/10.1016/j.jelechem.2021.115351
[36] M. Yeganeh, M. T. Shoushtari, A. T. Khanjar, N. H. J. Al Hasan, Microstructure evolution, corrosion behavior, and biocompatibility of Ti-6Al-4V alloy manufactured by electron beam melting (EBM) technique, Colloids and Surfaces A: Physicochemical and Engineering Aspects 679 (2023) 132519. https://doi.org/10.1016/j.colsurfa.2023.132519 DOI: https://doi.org/10.1016/j.colsurfa.2023.132519
[37] T. S. N. S. Narayanan, J. Kim, H. W. Park, High performance corrosion and wear resistant Ti-6Al-4V alloy by the hybrid treatment method, Applied Surface Science 504 (2019) 144388. https://doi.org/10.1016/j.apsusc.2019.144388 DOI: https://doi.org/10.1016/j.apsusc.2019.144388
[38] J. Ma, F. Feng, B. Yu, H. Chen, L. Fan, Effect of cooling temperature on the microstructure and corrosion behavior of X80 pipeline steel, International Journal of Minerals, Metallurgy and Materials 27 (2020) 347-353. https://doi.org/10.1007/s12613-019-1882-x DOI: https://doi.org/10.1007/s12613-019-1882-x
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Mahdi Yeganeh, Mostafa Eskandari, Hasan Mousavi
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
Funding data
-
Shahid Chamran University of Ahvaz
Grant numbers SCU.EM1403.31395
