The effect of coating drying conditions on bronze corrosion protection
Original scientific paper
DOI:
https://doi.org/10.5599/jese.2228Keywords:
Waterborne coatings, drying temperature, electrochemical impedance spectroscopy, polarization measurementsAbstract
Waterborne coatings present a green alternative to solvent-borne coatings as only a small amount of organic solvent is released into the environment during drying. However, for waterborne coatings, the drying process is much more challenging due to the slow evaporation of water. In this work, the influence of drying temperature on the protective properties of a waterborne acrylic coating was studied. Its performance in corrosion protection of bronze substrates, representing the bronzes used for the sculptures placed outdoors, was examined. Corrosion properties were evaluated by linear polarization measurements and electrochemical impedance spectroscopy during three-week exposure to artificial acid rain solution. It was found that drying at ambient temperature resulted in modest corrosion protection, while drying at 55 °C ensured greater initial corrosion resistance, which gradually degraded during exposure to acid rain solution accompanied by the coating blistering. Drying of one-layer coating at 40 °C resulted in the formation of clearly visible corrosion products. If the coating was applied in three layers, the drying process was more efficient, leading to slightly higher polarization resistance values without visible corrosion at the bronze surface. Furthermore, the studied waterborne acrylic coating provided good corrosion protection of patinated bronze surfaces. Additionally, it was found that for efficient corrosion protection, it is preferable that the coating contains a corrosion inhibitor in order to avoid substrate corrosion during coating drying. When applied properly, studied coating does not alter the state of surfaces, both bare and patinated, which is important for its application in bronze cultural heritage protection.
Downloads
References
M. Wadsak, I. Constantinides, G. Vittiglio, A. Adriaens, K. Janssens, M. Schreiner, F.C. Adams, P. Brunella, M. Wuttmann, Multianalytical study of patina formed on archaeological metal objects from Bliesbruck-Reinheim, Microchimica Acta 133 (2000) 159–164. https://doi.org/10.1007/s006040070086
D.A. Scott, Copper and Bronze in Art: Corrosion, colorants, conservation, Getty Publications, Los Angeles, California, 2002, p. 277.
G. Di Carlo, C. Giuliani, C. Riccucci, M. Pascucci, E. Mesina, G. Fierro, M. Lavorgna, G.M. Ingo, Artificial patina formation onto copper-based alloys: chloride and sulphate induced corrosion processes, Applied Surface Science 421 (2017) 120-127. https://doi.org/10.1016/j.apsusc.2017.01.080
E. Rocca, F. Mirambet, in Corrosion of metallic heritage artefacts, investigation, conservation and prediction for long-term behavior, P. Dillmann, G. Beranger, P. Piccardo, H. Matthiesen, Woodhead Publishing, City, USA, 2007, p. 308-334.
J. Hu, K. Peng, J. Guo, D. Shan, G.B. Kim, Q. Li, E. Gerhard, L. Zhu, W. Tu, W. Lv, M.A. Hickner, J. Yang, Click crosslinking improved waterborne polymers for environment-friendly coatings and adhesives, Applied Materials and Interfaces 8 (2016) 17499–17510. https://doi.org/10.1021/acsami.6b02131
R. Hischier, B. Nowack, F. Gottschalk, I. Hincapie, M. Steinfeldt, C. Som, Life cycle assessment of façade coating systems containing manufactured nanomaterials, Journal of Nanoparticle Research 17 (2015) 68. https://doi.org/10.1007/s11051-015-2881-0
J.L. Hall, A. Pérez, E.L. Kynaston, C. Lindsay, J.L. Keddie, Effects of environmental conditions on the micro-mechanical properties of formulate waterborne coatings, Progress in Organic Coatings 163 (2022) 106657. https://doi.org/10.1016/j.porgcoat.2021.106657
E. Almeida, D. Santos, J. Uruchurtu, Corrosion performance of waterborne coatings for structural steel, Progress in Organic Coatings 37 (1999) 131-140. https://doi.org/10.1016/S0300-9440(99)00064-8
V. Duecoffre, W. Diener, C. Flosbach, W. Schubert, Emulsifiers with high chemical resistance: a key to high performance waterborne coatings, Progress in Organic Coatings 34 (1998) 200-205. https://doi.org/10.1016/S0300-9440(98)00032-0
F. Galliano, D. Landolt, Evaluation of corrosion protection properties of additives for waterborne epoxy coatings on steel, Progress in Organic Coatings 44 (2002) 217-225. https://doi.org/10.1016/S0300-9440(02)00016-4
T.D. Martins, M.T. Viciosa, M.B. Oliveira, A. Fernandes, J.F. Mano, C. Baleizão, J.P.S. Farinha, Reversible imine crosslinking in waterborne self-healing polymer coatings, Progress in Organic Coatings 180 (2023) 107552. https://doi.org/10.1016/j.porgcoat.2023.107552
M.E. Belowich, J.F. Stoddart, Dynamic imine chemistry, Chemical Society Reviews 41 (2012) 2003-2004. https://doi.org/10.1039/c2cs15305j
J.M.G. Martinho, J.P.S. Farinha, Analytical series: fluorescence decay methods for the characterization of latex film formation, Journal of Coatings Technology and Research 10 (2013) 42-49.
S. Piçarra, C.A.M. Afonso, V.B. Kurteva, A. Fedorov, J.M.G. Martinho, J.P.S. Farinha, The influence of nanoparticle architecture on latex film formation and healing properties, Journal of Colloid and Interface Science 368 (2012) 21-33. https://doi.org/10.1016/j.jcis.2011.10.077
A. Aradian, E. Raphaël, P.G. de Gennes, Strengthening of a polymer interface: interdiffusion and cross-linking, Macromolecules 33 (2000) 9444-9451. https://doi.org/10.1021/ma0010581
I. Stojanović, I. Juraga, V. Alar, Influence of drying temperature on protective properties of waterborne and solventborne epoxy coating, International Journal of Electrochemical Science 9 (2014) 2507-2517. https://doi.org/10.1016/S1452-3981(23)07943-9
H.-D. Hwang, J.-I. Moon, J.H. Choi, H.-J. Kim, S.D. Kim, J.C. Park, Effect of water drying conditions on the surface property and morphology of waterborne UV-curable coatings for engineered flooring, Journal of Industrial and Engineering Chemistry 158 (2009) 381-387. https://doi.org/10.1016/j.jiec.2008.11.002
A. Kapitanović, H. Otmačić Ćurković, The influence of phosphonic acid pretreatment on the bronze corrosion protection by waterborne coating, Journal of Solid State Electrochemistry 27 (2023) 1861-1875. https://doi.org/10.1007/s10008-023-05490-1
T. Kosec, A. Legat, I. Milošev, The comparison of organic protective layers on bronze and copper, Progress in Organic Coatings 69 (2010) 199-206. https://doi.org/10.1016/j.porgcoat.2010.04.010
F. Mansfeld, Use of electrochemical impedance spectroscopy for the study of corrosion protection by polymer coatings, Journal of Applied Electrochemistry 25 (1995) 187-202. https://doi.org/10.1007/BF00262955
E. Cano, D. Lafuente, D.M. Bastidas, Use of EIS for the evaluation of the protective properties of coatings for metallic cultural heritage: a review, Journal of Solid State Electrochemistry 14 (2010) 381-391. https://doi.org/10.1007/s10008-009-0902-6
E. Cano, D.M. Bastidas, V. Argyropoulos, S. Fajardo, A. Siatou, J.M. Bastidas, C. Degrigny, Electrochemical characterization of organic coatings for protection of historic steel artefacts, Journal of Solid State Electrochemistry 14 (2010) 453-463. https://doi.org/10.1007/s10008-009-0907-1
H. Wang, P. Zhang, G. Fei, Y. Ma, N. Rang, Y. Kang, Design and properties of environmental anticorrosion coating based on m-aminobenzenesulfonic acid/aniline/p-phenylenediamine terpolymer, Progress in Organic Coatings 137 (2019) 105274. https://doi.org/10.1016/j.porgcoat.2019.105274
L. Jianguo, G. Gaoping, Y. Chuanwei, EIS study of corrosion behaviour of organic coating/Dacromet composite systems, Electrochimica Acta 50 (2005) 3320-3332. https://doi.org/10.1016/j.electacta.2004.12.010
A. Collazo, B. Díaz, R. Figueroa, X.R. Nóvoa, C. Pérez, Corrosion resistance of a water-borne resin doped with graphene derivatives applied on galvanized steel, Progress in Organic Coatings 173 (2022) 107220. https://doi.org/10.1016/j.porgcoat.2022.107220
A. Miszczyk, K. Darowicki, Water uptake in protective organic coatings and its reflection in measured coating impedance, Progress in Organic Coatings 124 (2018) 296-302. https://doi.org/10.1016/j.porgcoat.2018.03.002
F. Bellucci, L. Nicodemo, Water transport in organic coatings, Corrosion 49 (1993) 235-247. https://doi.org/10.5006/1.3316044
G. Grundmeier, W. Schmidt, M. Stratmann, Corrosion protection by organic coatings: electrochemical mechanism and novel methods of investigation, Electrochimica Acta 45 (2000) 2515-2533. https://doi.org/10.1016/S0013-4686(00)00348-0
H. Qian, X. Fu, Y. Chi, R. Zhang, C. Zhan, H. Sun, X. Zhou, J. Sun, Study on electrodeposition and corrosion resistance of Cu-Sn alloy prepared in ChCl-EG deep eutectic solvent, Journal of Solid State Electrochemistry 26 (2002) 469-479. https://doi.org/10.1007/s10008-021-05086-7
B. Dou, H. Xiao X. Lin, Y. Zhang, S. Zhao, S. Duan, X. Gao, Z. Fang, Investigation of the anti-corrosion properties of fluorinated graphene-modified waterborne epoxy coatings for carbon steel, Coatings 11 (2021) 254. https://doi.org/10.3390/coatings11020254
J.B. Bajat, I. Milošev, Ž. Jovanović, V.B. Mišković-Stanković, Studies on adhesion characteristics and corrosion behaviour of vinyltriethoxysilane/epoxy coating protective system on aluminium, Applied Surface Science 256 (2010) 3508-3517. https://doi.org/10.1016/j.apsusc.2009.12.100
A. Kapitanović, T. Kokot, H. Otmačić Ćurković, Bronze corrosion protection by bilayer systems: self-assembled monolayers of phosphonic acid/waterborne acrylic coating, Progress in Organic Coatings 186 (2024) 107984. https://doi.org/10.1016/j.porgcoat.2023.107984
G. Lendvay-Gyórik, T. Pajkossy, B. Lengyel, Corrosion-protection properties of water-borne paint coatings as studied by electrochemical impedance spectroscopy and gravimetry. Progress in Organic Coatings 56 (2006) 304-310. https://doi.org/10.1016/j.porgcoat.2006.05.012
L.G. Ecco, J. Li, M. Fedel, F. Deflorian, J. Pan, EIS and in situ AFM study of barrier property and stability of waterborne and solventborne clear coats, Progress in Organic Coatings 77 (2014) 600-608. http://dx.doi.org/10.1016/j.porgcoat.2013.11.024
C. Le Pen, C. Lacabanne, N. Pébère, Characterisation of water-based coatings by electrochemical impedance spectroscopy, Progress in Organic Coatings 46 (2003) 77-83. https://doi.org/10.1016/S0300-9440(02)00213-8
A. Roggero, L. Villareal, N. Caussé, A. Santos, N. Pébère, Correlation between the physical structure of a commercially formulated epoxy paint and its electrochemical impedance response, Progress in Organic Coatings 146 (2020) 105729. https://doi.org//10.1016/j.porgcoat.2020.105729
A. Kapitanović, H. Otmačić Ćurković, The effect of corrosion conditions on aging of artificial patina on three bronzes, Coatings 12 (2022) 936. https://doi.org/10.3390/coatings12070936
K. Marušić, H. Otmačić-Ćurković, Š. Horvat-Kurbegović, H. Takenouti, E. Stupnišek-Lisac, Comparative studies of chemical and alectrochemical preparation of artificial bronze patinas and their protection by corrosion inhibitor, Electrochimica Acta 54 (2009) 7106-7113. https://doi.org/10.1016/j.electacta.2009.07.014
G. Masi, J. Esvan, C. Josse, C. Chiavari, E. Bernardi, C. Martini, M.C. Bignozzi, N. Gartner, T. Kosec, L. Robbiola, Characterisation of typical patinas simulating bronze corrosion in outdoor conditions, Material Chemistry and Physics 200 (2017) 308-321. https://doi.org/10.1016/j.matchemphys.2017.07.091
Downloads
Published
How to Cite
Issue
Section
License
Articles are published under the terms and conditions of the
Creative Commons Attribution license 4.0 International.
Funding data
-
Hrvatska Zaklada za Znanost
Grant numbers IP-2019-04-5030